SSW-113H - Detector Seco-Larm - Free user manual and instructions
Find the device manual for free SSW-113H Seco-Larm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Magnetic Contact Detector (Door/Window Sensor) |
| Brand | Seco-Larm |
| Model | SSW-113H |
| Sensor Type | Reed Switch (Normally Closed) |
| Operating Voltage | 12-24V DC/AC |
| Current Draw | < 0.5 mA |
| Contact Rating | 0.5A @ 24V DC |
| Wire Termination | Screw Terminals |
| Dimensions (Sensor) | 28 mm × 13 mm × 8 mm (L×W×H) |
| Dimensions (Magnet) | 28 mm × 13 mm × 8 mm (L×W×H) |
| Weight | 10 g (sensor + magnet) |
| Gap Distance | Up to 20 mm |
| Operating Temperature | -40°C to 85°C |
| Enclosure Material | ABS Plastic |
| Wiring | 2-wire loop (COM and NC/NO) |
| Security Function | Detects door/window opening |
| Installation | Surface mount with screws or adhesive tape |
| Maintenance | Keep contacts clean; avoid moisture |
| Spare Parts | Replacement magnet available |
| Compliance | UL listed (typical) |
Frequently Asked Questions - SSW-113H Seco-Larm
What is the typical operating voltage for the SSW-113H?
The SSW-113H operates on 12-24V DC or AC.
How does the SSW-113H detect opening?
It uses a reed switch that opens or closes a circuit when the magnet moves away.
Is the SSW-113H normally closed or normally open?
The default configuration is Normally Closed (NC), but it can be wired as Normally Open (NO) depending on the alarm panel.
What is the maximum gap distance between sensor and magnet?
The reliable gap distance is up to 20 mm.
Can the SSW-113H be used outdoors?
It is designed for indoor use; outdoor installation requires a weatherproof enclosure.
How do I wire the SSW-113H?
Connect the two wires to the alarm panel's zone input. Use the COM and NC terminals.
What is the current consumption of the SSW-113H?
The current draw is typically less than 0.5 mA.
Does the SSW-113H require batteries?
No, it is a hardwired sensor powered by the alarm panel.
What maintenance does the SSW-113H need?
Periodically clean the contacts and ensure the magnet and sensor are aligned.
Can I replace the magnet if lost?
Yes, replacement magnets are available from Seco-Larm.
User questions about SSW-113H Seco-Larm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual SSW-113H - Seco-Larm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SSW-113H by Seco-Larm.
USER MANUAL SSW-113H Seco-Larm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Seco-Larm
Model : SSW-113H
Category : Detector