Enforcer EV-Y2201-A2WQ - Security Camera Seco-Larm - Free user manual and instructions
Find the device manual for free Enforcer EV-Y2201-A2WQ Seco-Larm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor Security Camera |
| Brand | Seco-Larm |
| Model | Enforcer EV-Y2201-A2WQ |
| Resolution | 1080p Full HD (1920x1080) at 30fps |
| Lens | 3.6mm fixed lens with 80° field of view |
| Night Vision | 32 IR LEDs with up to 30m (98 ft) range |
| Power Supply | 12V DC or PoE (IEEE 802.3af) |
| Connectivity | Ethernet RJ45 and Wi-Fi 2.4 GHz |
| Weatherproof | IP66 rated aluminum housing |
| Motion Detection | Yes, with email and push notification alerts |
| Storage | MicroSD slot supporting up to 128 GB |
| Audio | Two-way audio with built-in microphone and speaker |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Dimensions | 70 x 70 x 180 mm (2.8 x 2.8 x 7.1 in) |
| Weight | 1.2 kg (2.65 lbs) |
| Mounting | Included wall/ceiling bracket |
| Cleaning | Wipe with a soft dry cloth; avoid solvents |
| Security | Password protected and encrypted video stream |
| Spare Parts | Replacement brackets and accessories available |
| Repair | Contact Seco-Larm certified service center |
| Certifications | FCC and CE compliant |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - Enforcer EV-Y2201-A2WQ Seco-Larm
How do I perform a factory reset on the Enforcer EV-Y2201-A2WQ?
Locate the reset hole on the camera, press and hold the reset button for 10 seconds with a paperclip. The camera will reboot and restore default settings.
What is the default IP address and login for the camera?
The default IP is 192.168.0.168 with username admin and password admin. Change them after the first login for security.
Can I mount the camera outdoors?
Yes, the camera has an IP66 weatherproof rating. Use the included bracket to mount it on a wall or ceiling. Ensure the cable connections are sealed against moisture.
How do I set up motion detection alerts?
In the camera's web interface, go to Alarm > Motion Detection, enable it, and set the sensitivity and detection area. Configure email alerts in the network settings to receive notifications.
How can I access the camera remotely over the internet?
Use the Seco-Larm app or the web interface. Configure port forwarding on your router or use P2P (Cloud) service by scanning the QR code on the camera to bind it to your account.
What are the Wi-Fi setup procedures?
Connect the camera to your router via an Ethernet cable first. Log in to the web interface, go to Network > Wi-Fi, scan for your network, enter the SSID and password, then disconnect the cable. The camera will now use Wi-Fi.
How do I install a microSD card for local recording?
Open the SD card slot cover, insert a microSD card (up to 128 GB) with the metal contacts facing down. Format the card via Storage > Format in settings. Enable continuous recording or scheduled recording.
Why is my camera not showing video at night?
Check if the IR LEDs are enabled. Access settings and ensure Night Vision Mode is set to Auto. Also verify that the power supply provides sufficient voltage, as low power can reduce IR performance.
How should I clean and maintain the camera?
Use a soft, dry microfiber cloth to wipe the lens and housing. Do not use water, chemicals, or abrasive materials. Periodically check the camera connections and mounting.
What should I do if the firmware update fails?
Download the latest firmware from the Seco-Larm support website. Perform a factory reset, then manually upload the firmware via the Maintenance page. If the issue persists, contact technical support.
User questions about Enforcer EV-Y2201-A2WQ Seco-Larm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual Enforcer EV-Y2201-A2WQ - Seco-Larm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Enforcer EV-Y2201-A2WQ by Seco-Larm.
USER MANUAL Enforcer EV-Y2201-A2WQ Seco-Larm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Seco-Larm
Model : Enforcer EV-Y2201-A2WQ
Category : Security Camera