SNB-5004 - Security Camera Hanwha - Free user manual and instructions
Find the device manual for free SNB-5004 Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Bullet Security Camera |
| Model | SNB-5004 |
| Manufacturer | Hanwha |
| Image Sensor | 1/3-inch CMOS |
| Resolution | Up to 2 Megapixels (1920x1080) |
| Video Compression | H.264, MJPEG |
| Minimum Illumination | 0.01 lux (Color), 0 lux (B/W with IR) |
| Night Vision Range | Up to 30 meters (IR LEDs) |
| Lens | 3.6mm fixed lens |
| Field of View | Horizontal: 80°, Vertical: 45° |
| Audio | Two-way audio (built-in microphone & speaker) |
| Network Interface | 10/100 Mbps Ethernet (RJ-45) |
| Power Supply | PoE (IEEE 802.3af) or DC 12V |
| Power Consumption | Max. 6W (PoE) |
| Dimensions (WxHxD) | 70 x 180 x 70 mm (2.8 x 7.1 x 2.8 in) |
| Weight | 450 g (1.0 lb) |
| Weatherproof Rating | IP66 |
| Operating Temperature | -30°C to +55°C (-22°F to +131°F) |
| Storage Temperature | -40°C to +60°C (-40°F to +140°F) |
| Main Features | Motion detection, tampering alarm, remote access via web/APP |
| Interface | CVBS (for setup), Micro SD slot (up to 128GB) |
| Maintenance | Clean lens with soft, dry cloth; check connections periodically |
| Safety | Use only certified power adapter; install in accordance with local codes |
| Spare Parts & Repairability | Contact Hanwha authorized service center for replacement parts |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - SNB-5004 Hanwha
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot with default settings.
What is the default IP address of the camera?
The default IP address is 192.168.1.100. You can find the full list of defaults in the user manual.
Can the camera be mounted outdoors?
Yes, the camera has an IP66 rating, making it weatherproof and suitable for outdoor use.
Does the camera support Power over Ethernet (PoE)?
Yes, the SNB-5004 supports PoE (IEEE 802.3af) for both data and power over a single cable.
What is the night vision range?
The built-in IR LEDs provide night vision up to 30 meters (98 feet) in complete darkness.
How can I access the camera remotely?
You can access the camera via a web browser using its IP address or through the Hanwha Smart Viewer app on mobile devices.
What video compression formats are supported?
The camera supports H.264 and MJPEG compression for flexible bandwidth and storage management.
Is there built-in storage?
Yes, the camera has a Micro SD card slot that supports up to 128GB for local recording.
Can the camera be used with an NVR?
Yes, it is ONVIF compliant and compatible with most third-party NVRs that support ONVIF Profile S.
What is the recommended maintenance for the camera?
Periodically clean the lens with a soft, dry cloth and ensure that the housing seals are intact to maintain weather resistance.
User questions about SNB-5004 Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual SNB-5004 - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SNB-5004 by Hanwha.
USER MANUAL SNB-5004 Hanwha
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hanwha
Model : SNB-5004
Category : Security Camera