PNM-9000VQ - Security Camera Hanwha - Free user manual and instructions
Find the device manual for free PNM-9000VQ Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multi-directional Network Camera |
| Model | PNM-9000VQ |
| Brand | Hanwha Techwin |
| Resolution | Up to 5 Megapixels |
| Image Sensor | 1/2.8" CMOS |
| Lens | 2.8mm fixed; F2.0 |
| IR Range | Up to 15m |
| Weatherproof Rating | IP66 |
| Power Supply | PoE+ (IEEE 802.3at) or 12V DC |
| Dimensions | Ø130 x 102mm |
| Weight | Approx 0.6kg |
| Installation Type | Ceiling or wall mount |
| Main Functions | 360° panoramic view with two sensors, Wide Dynamic Range, Smart analytics, Motion detection, Tampering alarm, Night vision, H.265 compression, ONVIF Profile G/Q |
| Maintenance | Clean lens with soft cloth; avoid water jets; check firmware updates annually |
| Safety | Use only approved PoE switch or UL-listed power adapter; mount securely; follow local electrical codes |
| Spare Parts | No user-replaceable parts other than SD card (optional); contact Hanwha for lenses or housing |
| General Info | 3-year warranty; manufactured in Korea; software support via Hanwha Wave |
Frequently Asked Questions - PNM-9000VQ Hanwha
How do I reset the camera to factory default?
Press and hold the reset button (located on the camera) for about 10 seconds using a paperclip until the status LEDs blink. The camera will restart with default settings.
What is the default IP address of the PNM-9000VQ?
The default IP address is 192.168.1.100. You can change it via the web interface or Hanwha Device Manager.
Is the PNM-9000VQ suitable for outdoor use?
Yes, the camera has an IP66 weatherproof rating, making it suitable for outdoor installation. Ensure proper sealing of connectors.
How do I configure video recording?
Recording can be set up via the camera's web interface under 'Event > Recording' or using an NVR. You can schedule continuous or motion-triggered recording to an SD card or network storage.
Is the camera compatible with third-party NVRs?
Yes, it supports ONVIF Profile G/Q. Most major NVRs (e.g., Hikvision, Dahua) can integrate it, but verify compatibility with your NVR manufacturer.
How do I mount the camera on a ceiling?
Use the included mounting bracket. Secure it with screws (not provided) to a solid surface. Adjust the camera angle via the ball joint. Refer to the manual for drilling template.
Can I use the camera with third-party software like Blue Iris?
Yes, because it supports ONVIF and RTSP streams. Add it as an ONVIF device using the camera's IP address, username, and password.
What microSD card size is supported?
The camera supports microSD cards up to 128GB (SDXC). For reliable recording, use a high endurance card (e.g., Class 10 or UHS-I).
How do I enable Wide Dynamic Range (WDR)?
Log into the camera's web interface, go to 'Video > Picture' and enable WDR. Adjust the strength as needed. WDR improves visibility in high-contrast scenes.
What is the power consumption of the PNM-9000VQ?
The camera consumes up to 12.95W (PoE+ class 4) or approximately 1A at 12V DC. Ensure your PoE switch can supply sufficient power.
User questions about PNM-9000VQ Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual PNM-9000VQ - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PNM-9000VQ by Hanwha.
USER MANUAL PNM-9000VQ Hanwha
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hanwha
Model : PNM-9000VQ
Category : Security Camera