SRN-1000 - Security Camera Hanwha - Free user manual and instructions
Find the device manual for free SRN-1000 Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera |
| Brand | Hanwha |
| Model | SRN-1000 |
| Dimensions | Approximately 150 x 70 x 70 mm (without lens) |
| Weight | Approximately 500 g (without bracket) |
| Power Supply | DC 12V or PoE (Power over Ethernet) |
| Power Consumption | Max 12 W |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | Up to 1920 x 1080 (Full HD) |
| Frame Rate | Up to 30 fps at 1080p |
| Lens | 3.6 mm fixed lens (field of view: 90°) |
| Night Vision | Up to 30 meters with IR LEDs |
| Compression | H.265, H.264, MJPEG |
| Audio | Built-in microphone and speaker (two-way audio) |
| Storage | MicroSD slot up to 256 GB |
| Network | Ethernet (RJ45) 10/100 Mbps |
| Protocols | TCP/IP, DHCP, HTTP, RTSP, ONVIF |
| Operating Temperature | -10°C to +50°C |
| Weatherproof Rating | IP66 (outdoor use) |
| Mounting | Wall or ceiling mount bracket included |
| Maintenance | Clean lens with soft dry cloth; check connections periodically |
| Spare Parts | Replacement brackets, power adapters, and IR LED units available |
| Repairability | Modular design allows replacement of lens, sensor, and motherboard |
| General Information | Supports motion detection, tamper alarm, and remote viewing via mobile app |
Frequently Asked Questions - SRN-1000 Hanwha
How do I reset the SRN-1000 to factory defaults?
Press and hold the reset button on the back of the camera for 10 seconds using a paperclip. The camera will reboot and restore all settings to factory defaults.
Can I use this camera without an NVR?
Yes, the SRN-1000 supports local recording via a MicroSD card and can also stream directly to a PC using RTSP. However, for advanced features like continuous recording, an NVR is recommended.
What is the maximum SD card capacity supported?
The camera supports MicroSD cards up to 256 GB (Class 10 or higher recommended) for reliable recording.
How do I enable motion detection alerts?
Access the camera's web interface, go to 'Event' settings, enable motion detection, and configure the sensitivity and action (e.g., email notification, FTP upload).
Is the camera compatible with ONVIF?
Yes, the SRN-1000 is ONVIF Profile S compliant, ensuring compatibility with most third-party VMS and NVR systems.
What is the default IP address and login?
Default IP is 192.168.1.168 (DHCP enabled if not). Default username is 'admin' and password is 'admin' (change upon first login).
How far can the IR night vision see?
The built-in IR LEDs provide clear night vision up to 30 meters (98 feet) in complete darkness.
Can I mount the camera outdoors?
Yes, the SRN-1000 has an IP66 weatherproof rating and operates from -10°C to +50°C, suitable for outdoor use.
How do I update the firmware?
Download the latest firmware from Hanwha's website, upload it via the camera's web interface under 'System > Maintenance > Firmware Upgrade'.
Does the camera support two-way audio?
Yes, it has a built-in microphone and speaker, allowing you to listen and talk through the camera using the mobile app or NVR.
User questions about SRN-1000 Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual SRN-1000 - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SRN-1000 by Hanwha.
USER MANUAL SRN-1000 Hanwha
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hanwha
Model : SRN-1000
Category : Security Camera