SNB-3002 - Security Camera Hanwha - Free user manual and instructions
Find the device manual for free SNB-3002 Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Network Bullet Security Camera |
| Brand | Hanwha (Hanwha Techwin) |
| Model | SNB-3002 |
| Image Sensor | 1/3 inch CMOS progressive scan |
| Resolution | 3 Megapixels (2048 x 1536) |
| Max Frame Rate | 30 fps at 2048 x 1536 |
| Video Compression | H.264 and MJPEG |
| Day/Night | ICR (Infrared Cut-filter Removable) for day/night operation |
| Minimum Illumination | 0.05 Lux (color), 0.01 Lux (black and white) |
| Lens Type | Fixed focal length lens |
| Focal Length | 4.7 mm |
| Field of View | Approx. 70 degrees (horizontal) |
| IR Range | Up to 30 m with built-in IR LEDs |
| Environmental Rating | IP66 weatherproof housing |
| Power Supply | PoE (IEEE 802.3af) or DC 12 V |
| Power Consumption | Max 9 W |
| Dimensions (W x H x D) | 80 x 90 x 230 mm |
| Weight | Approx. 0.85 kg |
| Operating Temperature | -10 C to +50 C |
| Network Interface | 10/100 Base-T Ethernet (RJ-45) |
| Audio Support | Bi-directional audio (line in/out) |
| Storage | Micro SD/SDHC card slot (up to 32 GB) |
| Maintenance and Cleaning | Wipe body and lens with soft, dry cloth; avoid solvents and abrasives |
| Safety and Security | Password protection, IP address filtering, HTTPS encryption |
| Spare Parts and Repairability | Modular design allows replacement of IR board, lens, and power board |
| General Information | Compatible with Hanwha Wisenet management software and ONVIF |
Frequently Asked Questions - SNB-3002 Hanwha
How do I reset the camera to factory defaults?
Press and hold the reset button located near the network port for about 5 seconds while the camera is powered on. The camera will reboot with factory settings.
What is the default IP address and login?
The default IP address is 192.168.1.100. The default username is admin and the first-time password is set during initial setup.
Can the SNB-3002 be viewed remotely over the internet?
Yes. Configure port forwarding on your router or use Wisenet DDNS to access the camera from a remote location via a web browser or mobile app.
Does this camera support ONVIF for integration with third-party systems?
Yes, the SNB-3002 supports ONVIF Profile S, making it compatible with many VMS platforms and NVRs.
Why are the IR LEDs not working at night?
Check that the camera is in night mode (ICR switched on) and that the IR LED option is enabled in the web UI. Also ensure there is no strong light source near the camera that keeps it in day mode.
How can I save video locally without an NVR?
Install a micro SD card (up to 32 GB) in the camera slot, then set up local recording schedules and event recording in the web UI.
What power options are available?
The camera accepts PoE (IEEE 802.3af) from a PoE injector or switch, or a DC 12 V power adapter. Use only the recommended voltage.
How do I update the firmware?
Download the latest firmware from the Hanwha support website, open the camera web UI, go to Settings -> System -> Upgrade, upload the file, and reboot.
Is the snb-3002 suitable for outdoor installation?
Yes, it has an IP66-rated weatherproof housing and operates from -10 C to +50 C, so it can be installed outdoors with proper sun/rain shielding if needed.
What should I do if the live image is unclear or blurry?
First clean the lens with a soft dry cloth. Then adjust the lens focus if accessible, and check the video quality settings. If blur persists, verify that the camera is not operating in low light without sufficient IR.
User questions about SNB-3002 Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual SNB-3002 - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SNB-3002 by Hanwha.