OSC6711WH - Range hood Hansa - Free user manual and instructions
Find the device manual for free OSC6711WH Hansa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Range hood |
| Brand | Hansa |
| Model | OSC6711WH |
| Width | 60 cm |
| Height | 120-150 cm (adjustable) |
| Depth | 50 cm |
| Weight | 12 kg |
| Power supply | 220-240 V, 50-60 Hz |
| Maximum power consumption | 200 W |
| Motor power | 150 W |
| Lighting | LED, 2 x 3 W |
| Number of speed levels | 3 |
| Extraction capacity (max) | 450 m³/h |
| Noise level (max) | 65 dB(A) |
| Grease filter type | Aluminum, washable |
| Carbon filter type | Optional, replaceable |
| Operating modes | Extraction (ducted) / Recirculation (with carbon filter) |
| Control type | Slider buttons |
| Energy efficiency class | A+ |
| Installation | Wall-mounted, chimney type |
| Included accessories | Grease filter, installation manual |
Frequently Asked Questions - OSC6711WH Hansa
How to clean the grease filter?
The aluminum grease filter can be washed by hand or in the dishwasher. Use mild detergent and ensure it is completely dry before reinstalling.
How often should I replace the carbon filter?
If using recirculation mode, replace the carbon filter every 3-6 months depending on usage. The filter is not washable.
What is the minimum distance between the hood and the hob?
For electric hobs, minimum 50 cm; for gas hobs, minimum 65 cm. Check local regulations and manual.
How to change the LED light?
The LED lights are built-in. If they fail, contact Hansa service for replacement. Do not attempt to replace them yourself.
Can I use the hood without a carbon filter?
Yes, if you have an external duct (extraction mode). For recirculation mode, a carbon filter is required.
Why is my hood making a loud noise?
Check if the grease filter is clean and properly installed. Loud noise may also indicate loose parts or duct obstruction.
How to reset the filter saturation indicator?
If equipped, press and hold the lighting button for 3-5 seconds until the indicator turns off. Refer to manual for exact procedure.
What type of duct is recommended?
Use rigid or flexible aluminum duct with a diameter of 120-150 mm. Ensure minimal bends for efficient airflow.
Is the hood suitable for island installation?
No, this model is designed for wall-mounted installation only.
Where can I find spare parts?
Contact Hansa customer service or authorized dealers. Provide model number OSC6711WH for accurate parts.
User questions about OSC6711WH Hansa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual OSC6711WH - Hansa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OSC6711WH by Hansa.
USER MANUAL OSC6711WH Hansa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hansa
Model : OSC6711WH
Category : Range hood