OTP6241IH - Range hood Hansa - Free user manual and instructions
Find the device manual for free OTP6241IH Hansa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Range Hood |
| Brand | Hansa |
| Model | OTP6241IH |
| Width | 60 cm |
| Depth | 50 cm |
| Height (min-max) | 62 - 105 cm |
| Weight | Approx. 12 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Max Extraction Rate | 620 m³/h |
| Noise Level (max) | 65 dB(A) |
| Energy Class | A+ |
| Lighting | 2 x LED, 3 W each |
| Filter Type | Aluminum grease filter, optional carbon filter |
| Number of Speeds | 3 + Boost |
| Control Type | Touch control with display |
| Installation | Built-in, recirculation or ducted |
| Duct Diameter | 150 mm |
| Grease Filter Cleaning | Dishwasher safe, clean monthly |
| Carbon Filter Replacement | Every 3-6 months (depending on use) |
| Safety Features | Auto shut-off, motor thermal protection |
| Spare Parts Availability | Filters, bulbs, motor available from Hansa service |
| Warranty | 2 years |
Frequently Asked Questions - OTP6241IH Hansa
How do I install the Hansa OTP6241IH range hood?
Installation must be done by a qualified technician. Ensure the hood is mounted at least 65 cm above the cooking surface. Follow the manual for ducting or recirculation setup, and connect to a 220-240 V power supply.
How often should I clean the grease filters?
Grease filters should be cleaned every 1-2 months, or more frequently with heavy use. They are dishwasher safe at low temperature. A clogged filter reduces suction efficiency.
Can the Hansa OTP6241IH be used in recirculation mode?
Yes, it can be used in recirculation mode. You need to install a carbon filter (not included). The air is filtered and returned to the kitchen.
What type of carbon filter does this model use?
The Hansa OTP6241IH uses a standard rectangular carbon filter (e.g., Hansa part number 123456). Replace every 3-6 months depending on usage.
How do I replace the LED bulbs?
LED bulbs are integrated and may require professional service. In case of failure, contact Hansa support for replacement. Do not attempt to replace them yourself.
What does the 'Boost' function do?
The Boost function provides maximum extraction power for a short time (e.g., 5 minutes) to quickly remove strong odors or steam. It returns to the previous speed automatically.
Is the noise level adjustable?
Yes, the hood has 3 speeds plus boost. Lower speeds are quieter (around 45 dB) while booster is louder (up to 65 dB). Choose appropriate speed for your cooking.
How do I reset the filter cleaning indicator?
After cleaning or replacing filters, press and hold the 'Filter' button for 3 seconds until the indicator light turns off. Consult manual for exact procedure.
What are the dimensions of the cut-out for built-in installation?
The cut-out dimensions are approximately 58.5 cm width x 28 cm depth. Refer to the installation template in the manual for precise measurements.
Where can I find spare parts for this hood?
Spare parts like filters, bulbs, and control boards are available from Hansa authorized service centers. Use the model number OTP6241IH when ordering.
User questions about OTP6241IH Hansa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual OTP6241IH - Hansa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OTP6241IH by Hansa.
USER MANUAL OTP6241IH Hansa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hansa
Model : OTP6241IH
Category : Range hood