WMR 100 - Weather Station OREGON SCIENTIFIC - Free user manual and instructions
Find the device manual for free WMR 100 OREGON SCIENTIFIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Weather Station |
| Model | WMR 100 |
| Brand | Oregon Scientific |
| Indoor Temperature Range | 0°C to 50°C (32°F to 122°F) |
| Outdoor Temperature Range | -20°C to 60°C (-4°F to 140°F) |
| Humidity Range | 25% to 95% RH |
| Barometric Pressure Range | 600 to 1100 hPa |
| Wind Speed Range | 0 to 50 m/s (0 to 112 mph) |
| Rainfall Resolution | 0.5 mm (0.02 in) |
| Radio Frequency | 433 MHz |
| Number of Remote Sensors Supported | Up to 10 |
| Display Type | LCD |
| Power Supply (Base Station) | AC adapter 6V 500mA |
| Power Supply (Remote Sensors) | 2 x AA batteries per sensor |
| Dimensions (Base Station) | 185 x 130 x 40 mm |
| Weight (Base Station) | 340 g |
| Features | Indoor/outdoor temperature and humidity, barometric pressure, wind speed/direction, rainfall, time/date, alarm, moon phase, weather forecast |
| Maintenance | Clean with a soft dry cloth; avoid solvents; replace batteries annually |
| Safety | Keep away from water; do not disassemble; use only recommended power supply |
| Spare Parts & Repairability | Contact Oregon Scientific support; some parts available online |
Frequently Asked Questions - WMR 100 OREGON SCIENTIFIC
How do I set up the WMR 100 weather station?
Insert batteries into the remote sensors first, then power on the base station with the AC adapter. Press the SETUP button to begin sensor pairing.
Why is the outdoor sensor not reading?
Ensure the sensor is within 100 meters of the base station and that the batteries are fresh. Check for interference from other devices.
How do I change the batteries in the rain gauge?
Open the rain gauge cover, remove the old batteries, and insert two new AA batteries. Ensure the polarity is correct.
Can I add more sensors to my WMR 100?
Yes, the WMR 100 supports up to 10 remote sensors. Follow the pairing procedure for each new sensor.
How do I reset the weather station?
Press and hold the RESET button on the back of the base station for 5 seconds. This clears all data and restores factory settings.
What does the moon phase display show?
The moon phase shows the current lunar phase based on the date and time set. It updates automatically.
How often does the wireless data update?
The base station receives data from sensors every 60 seconds for temperature/humidity and every 10 minutes for wind/rain.
My weather forecast seems wrong. Can I calibrate it?
The forecast uses barometric pressure trends. Ensure the altitude is set correctly in the settings menu for accurate predictions.
How do I clean the outdoor sensors?
Use a soft damp cloth to gently wipe the sensor housings. Avoid chemical cleaners that may damage the plastic.
Where can I find replacement parts?
Replacement sensors and accessories are available on the Oregon Scientific website or through authorized retailers.
User questions about WMR 100 OREGON SCIENTIFIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Weather Station in PDF format for free! Find your manual WMR 100 - OREGON SCIENTIFIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WMR 100 by OREGON SCIENTIFIC.
USER MANUAL WMR 100 OREGON SCIENTIFIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OREGON SCIENTIFIC
Model : WMR 100
Category : Weather Station