BAR 686A - Weather Station OREGON SCIENTIFIC - Free user manual and instructions
Find the device manual for free BAR 686A OREGON SCIENTIFIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Weather Station with Atomic Clock |
| Brand | Oregon Scientific |
| Model | BAR686A |
| Dimensions (Main Unit) | Approx. 130 x 75 x 20 mm |
| Weight (Main Unit) | Approx. 150 g (without batteries) |
| Power Supply | 2 x AA 1.5V batteries (not included) |
| Display | LCD with time, date, indoor/outdoor temperature & humidity |
| Indoor Temperature Range | 0°C to 50°C (32°F to 122°F) |
| Indoor Humidity Range | 25% to 95% RH |
| Outdoor Temperature Range | -20°C to 60°C (-4°F to 140°F) (with sensor) |
| Outdoor Humidity Range | 25% to 95% RH (with sensor) |
| Wireless Sensor Range | Up to 30 meters (98 ft) in open area |
| Number of Supported Sensors | Up to 3 (one included) |
| Weather Forecast | Icon-based (sunny, partly cloudy, cloudy, rainy) |
| Atomic Clock | DCF-77 / MSF-60 auto sync (Europe/UK) |
| Alarm | Daily alarm with snooze |
| Calendar | Day, date, month (up to year 2099) |
| Backlight | EL backlight, press any button |
| Mounting | Desktop stand or wall mount |
| Cleaning | Wipe with a soft dry cloth; do not use abrasive cleaners |
| Safety | Keep away from water and heat sources; use only specified batteries |
| Spare Parts | Replacement sensor (THN132N), batteries |
| General Information | Warranty: 2 years; for indoor use only |
Frequently Asked Questions - BAR 686A OREGON SCIENTIFIC
How do I set up the weather station?
Insert 2 AA batteries into the main unit and 2 AA batteries into the remote sensor. The display will show indoor readings immediately. The outdoor sensor should be placed within 30m of the main unit. The atomic clock will automatically sync within a few minutes.
How do I change the batteries?
Open the battery compartment on the back of the main unit and replace with fresh 2x AA batteries. For the remote sensor, open the compartment and replace with 2x AA. After replacing, press the RESET button on each device with a pin if needed.
How do I synchronize the atomic clock?
The clock automatically attempts to synchronize with the DCF signal (Germany) or MSF (UK) every night. Ensure the unit is placed away from metal and electronic interference. If sync fails, you can manually search by pressing the RECEPTION button for 2 seconds.
What should I do if the outdoor temperature shows '--.-' or dashes?
This indicates no signal from the remote sensor. Check that batteries are fresh and properly inserted. Move the sensor closer to the main unit (within 30m). Press and hold the CHANNEL/SEARCH button on the main unit for 2 seconds to resync.
Can I add additional outdoor sensors?
Yes, the BAR686A supports up to 3 remote sensors. Additional sensors must be set to different channels (1,2,3) via a switch inside the battery compartment. Then press and hold the CHANNEL/SEARCH button to register them.
How do I set the alarm?
Press the ALARM button once to show alarm time. Press and hold ALARM for 2 seconds until the hour flashes. Use +/- to adjust hour, press ALARM again to set minutes. Press ALARM again to confirm. Toggle alarm on/off by pressing ALARM repeatedly.
Why is the weather forecast not accurate?
The forecast is based on pressure trends and is generally accurate for the next 12-24 hours. Ensure the unit has been running for at least 24 hours to establish a baseline. Placement near windows or drafts can affect readings.
How do I clean the weather station?
Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Avoid getting moisture inside the battery compartment.
What do the icons on the display mean?
Icons include: sunny (sun), partly cloudy (sun with cloud), cloudy (cloud), rainy (cloud with rain). Also shows signal strength (bars), battery low for sensor, and time/date.
Where can I find the user manual?
The manual is available for download from the Oregon Scientific website or from notice-facile.com. Search for model BAR686A. It is a 2-page PDF with setup and operation instructions.
User questions about BAR 686A OREGON SCIENTIFIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Weather Station in PDF format for free! Find your manual BAR 686A - OREGON SCIENTIFIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BAR 686A by OREGON SCIENTIFIC.
USER MANUAL BAR 686A OREGON SCIENTIFIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OREGON SCIENTIFIC
Model : BAR 686A
Category : Weather Station