PLC-SU50S - Video projector SANYO - Free user manual and instructions
Find the device manual for free PLC-SU50S SANYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | Sanyo |
| Model | PLC-SU50S |
| Display Technology | LCD |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 2500 ANSI Lumens |
| Contrast Ratio | 500:1 |
| Lamp Life (Normal Mode) | 3000 hours |
| Lamp Power | 200 W |
| Keystone Correction | Vertical ±30° |
| Zoom Ratio | 1.2x Manual |
| Input Ports | VGA, Composite, S-Video, Audio |
| Weight | 3.5 kg |
| Dimensions (W x D x H) | 320 x 250 x 100 mm |
| Power Consumption (Typical) | 280 W |
| Standby Power | < 1 W |
| Noise Level (Normal Mode) | 32 dB |
| Included Accessories | Remote Control, Power Cable, VGA Cable, User Manual |
| Cleaning Instructions | Clean air filter every 100 hours; use soft cloth for lens |
| Replacement Lamp Part Number | POA-LMP61 (or similar) |
Frequently Asked Questions - PLC-SU50S SANYO
How do I replace the lamp in the Sanyo PLC-SU50S?
Turn off the projector and unplug it. Wait 30 minutes for the lamp to cool. Remove the lamp cover screw, slide open the cover, then remove the old lamp module. Insert the new lamp module (POA-LMP61 or equivalent) and secure it. Close the cover and reset the lamp timer via the menu.
How often should I clean the air filter?
Clean the air filter every 100 hours of use. Use a vacuum cleaner or wash it with mild detergent if heavily soiled. Allow it to dry completely before reinstalling.
Why is the projector overheating and shutting down?
This is usually due to a clogged air filter or blocked ventilation. Clean the filter and ensure proper airflow around the projector. If the problem persists, the internal fan may need service.
Can I connect my laptop to the projector?
Yes, use a standard VGA cable to connect your laptop's VGA output to the projector's VGA input. Select the appropriate source (Computer) using the remote or control panel.
How do I adjust the image size and focus?
Use the zoom ring on the lens to adjust image size, and the focus ring to sharpen the image. Adjust the projector's distance to the screen for the desired size.
What is the correct procedure for turning off the projector?
Press the power button once, then press again to confirm. The projector will cool down for about 90 seconds before entering standby. Do not unplug immediately; wait for the cooling fan to stop.
How do I reset the lamp timer?
After replacing the lamp, go to the on-screen menu, select 'Options' or 'Settings', then find 'Lamp Timer Reset'. Press OK and confirm to reset.
What does the 'Lamp' indicator mean?
A blinking or solid lamp indicator suggests the lamp is approaching the end of its life or has failed. Replace the lamp as soon as possible.
Can I use the projector in a ceiling mount?
Yes, the projector is compatible with ceiling mounts. Use a Sanyo-approved mount or a universal mount with proper weight rating. Ensure ventilation is not obstructed.
Where can I download the user manual?
The manual is available for free download on notice-facile.com. Search for 'Sanyo PLC-SU50S' and select PDF format at the top of the page.
User questions about PLC-SU50S SANYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual PLC-SU50S - SANYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLC-SU50S by SANYO.
USER MANUAL PLC-SU50S SANYO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANYO
Model : PLC-SU50S
Category : Video projector