PLC-200N - Video projector SANYO - Free user manual and instructions
Find the device manual for free PLC-200N SANYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | Sanyo |
| Model | PLC-200N |
| Display Technology | 3LCD |
| Native Resolution | XGA (1024 x 768) |
| Brightness (ANSI Lumens) | 2000 |
| Contrast Ratio | 400:1 |
| Lamp Type | UHP |
| Lamp Life (Normal Mode) | 2000 hours |
| Power Consumption | 300 W |
| Dimensions (W x D x H) | 320 x 250 x 100 mm |
| Weight | 3.5 kg |
| Input Ports | VGA, S-Video, Composite Video, Audio |
| Output Ports | Monitor Out, Audio Out |
| Keystone Correction | Vertical +/- 30 degrees |
| Zoom Lens | 1.2x manual zoom |
| Remote Control | Included |
| Noise Level | 34 dB (Eco Mode) |
| Maintenance | Clean air filter regularly |
| Safety Features | Auto power off, overheat protection |
| Spare Parts Available | Lamp, air filter |
Frequently Asked Questions - PLC-200N SANYO
How do I replace the lamp on the Sanyo PLC-200N?
Turn off the projector and unplug it. Wait 60 minutes for the lamp to cool. Remove the lamp cover screw on the bottom, pull out the old lamp, insert the new lamp, and replace the cover. Refer to the user manual for specific steps.
What is the maximum projection size for the PLC-200N?
The maximum projection size depends on distance. With a 1.2x zoom lens and 2000 lumens, you can project up to 300 inches diagonally in a dark room. Use the zoom and focus rings to adjust.
Can I connect a laptop to the Sanyo PLC-200N?
Yes, connect your laptop to the VGA input using a standard VGA cable. You may need to press the 'Source' button or FN key on your laptop to switch display mode.
How do I clean the air filter on the PLC-200N?
Turn off the projector and unplug it. Remove the filter cover on the side, take out the filter, and use a vacuum cleaner or soft brush to remove dust. Reinstall the filter and cover. Clean every 100 hours of use.
Why is my PLC-200N projector overheating?
Check if the air filter is clogged. Ensure the projector has at least 30 cm clearance on all sides. Avoid blocking the exhaust vents. If problem persists, contact support.
What resolutions does the Sanyo PLC-200N support?
The native resolution is XGA (1024x768). It can also scale lower resolutions like SVGA (800x600) and VGA (640x480). Accepts signals up to UXGA (1600x1200) via compression.
How can I adjust the keystone correction on the PLC-200N?
Press the Keystone button on the remote or control panel. Use the arrow keys to correct vertical distortion. Adjust within +/- 30 degrees.
Where can I download the user manual for the Sanyo PLC-200N?
You can download the free PDF manual from notice-facile.com. Search for 'Sanyo PLC-200N' and click the download button.
What is the lamp part number for the PLC-200N?
The lamp part number is typically POA-LMP101 or similar. Check the label on the old lamp or the user manual for the exact replacement part.
How do I reset the lamp timer on the Sanyo PLC-200N?
After replacing the lamp, go to the On-Screen Menu, navigate to 'Settings' or 'Lamp', select 'Reset Lamp Timer', and confirm. This clears the lamp usage hours.
User questions about PLC-200N SANYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual PLC-200N - SANYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLC-200N by SANYO.
USER MANUAL PLC-200N SANYO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANYO
Model : PLC-200N
Category : Video projector