PLC-WXE45 - Video projector SANYO - Free user manual and instructions
Find the device manual for free PLC-WXE45 SANYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LCD Video Projector |
| Resolution | WXGA (1280 x 800) |
| Brightness | 3000 ANSI Lumens |
| Contrast Ratio | 2000:1 |
| Lamp Type | UHP 230W |
| Lamp Life | 2000 hours (Normal), 3000 hours (Eco) |
| Power Consumption | 310W (Normal), 0.5W (Standby) |
| Weight | 3.5 kg |
| Dimensions (W x D x H) | 330 x 250 x 100 mm |
| Inputs | HDMI, VGA, Composite, S-Video, Audio |
| Outputs | VGA Monitor Out, Audio Out |
| Keystone Correction | Vertical ±30° |
| Zoom | 1.2x Manual |
| Built-in Speaker | 1 x 10W Mono |
| Noise Level | 35 dB (Normal), 29 dB (Eco) |
| Projection Lens | F=1.6-1.76, f=22.3-26.8 mm |
| Image Size | 40" - 300" Diagonal |
| Throw Ratio | 1.5 - 1.8:1 |
| Cleaning | Clean air filter and lens with soft cloth |
| Safety | Auto power-off, lens cover detection |
| Spare Parts | Lamp model: POA-LMP108 |
Frequently Asked Questions - PLC-WXE45 SANYO
How do I replace the lamp on the Sanyo PLC-WXE45?
Turn off the projector, unplug it, and let it cool for at least 45 minutes. Open the lamp cover, remove the old lamp by loosening the screws, insert the new lamp (model POA-LMP108), tighten screws, and close the cover. Reset the lamp timer from the menu.
Why is my projector overheating?
Check if the air filter is clogged with dust. Clean or replace it. Ensure the projector has proper ventilation and that the fans are working. Reduce ambient temperature if possible.
How do I clean the air filter?
Turn off and unplug the projector. Remove the filter cover, take out the filter, and gently vacuum or wash with mild soapy water. Let it dry completely before reinstalling.
Can I connect my laptop to the PLC-WXE45?
Yes, use a VGA or HDMI cable. If your laptop has only HDMI, use an HDMI cable. If it has a different port, you may need an adapter. Press the Source button to select the correct input.
What is the maximum projection size?
The projector can project images from 40 to 300 inches diagonally, depending on the distance. Use the zoom and focus rings to adjust.
How do I adjust keystone correction?
Press the Keystone button on the remote or projector menu. Use the arrow keys to correct vertical distortion. Adjust until the image is rectangular.
Why is the image blurry?
Adjust the focus ring on the lens. Also ensure the projector is at the correct distance and the lens is clean. If still blurry, check the resolution settings on your source device.
What is the lamp life and how can I extend it?
The lamp lasts about 2000 hours in normal mode and 3000 hours in eco mode. To extend life, use eco mode, avoid frequent on/off cycles, and keep the projector well-ventilated.
Does the projector have a remote control?
Yes, a remote control is included. It allows you to power on/off, adjust volume, zoom, keystone, and access menus. Replace batteries (AAA) when the range decreases.
What should I do if the projector does not power on?
Check if the power cord is securely plugged in and the outlet is working. Ensure the lamp cover is closed properly. If the lamp indicator blinks, the lamp may need replacement. Refer to the manual for error codes.
User questions about PLC-WXE45 SANYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual PLC-WXE45 - SANYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLC-WXE45 by SANYO.
USER MANUAL PLC-WXE45 SANYO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANYO
Model : PLC-WXE45
Category : Video projector