Xerun Bandit G2R - Remote control toy Hobbywing - Free user manual and instructions
Find the device manual for free Xerun Bandit G2R Hobbywing in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hobbywing |
| Model | Xerun Bandit G2R |
| Product Type | Brushless ESC & Motor Combo |
| Scale | 1/10 |
| Motor Type | Sensorless Brushless (4-pole) |
| ESC Type | Sensorless, 6A BEC |
| Input Voltage | 2S-4S LiPo (7.4V-14.8V) |
| Max Continuous Current | 120A |
| BEC Output | 6V/7.4V adjustable, 6A |
| Motor KV | 4000KV (typical) |
| Weight | 115g (ESC) + 160g (motor) |
| Dimensions (ESC) | 49 x 35 x 24 mm |
| Dimensions (Motor) | Diameter 36mm, Length 50mm |
| Connectors | 4mm banana (motor), EC5 or XT60 (power) |
| Programming | Via LCD Program Box or PC Link (optional) |
| Cooling | Integrated heat sink and active fan |
| Waterproof Rating | Not waterproof (avoid moisture) |
| Applications | 1/10 buggy, truggy, short course, on-road |
| Included Items | ESC, motor, programming card (if combo) |
| Maintenance | Clean after use, check screws, keep dry |
| Safety | Disconnect battery when not in use, allow cooling |
Frequently Asked Questions - Xerun Bandit G2R Hobbywing
What LiPo batteries are recommended for the Xerun Bandit G2R?
Use 2S to 4S LiPo batteries with capacity 4000-6000mAh and discharge rating above 50C. Ensure connectors match (EC5 or XT60).
Can I use this combo with a brushed motor?
No, the Xerun Bandit G2R is designed for brushless sensorless motors only. Connecting a brushed motor will damage the ESC.
How do I program the ESC settings?
Use the optional LCD Program Box or PC Link software. Connect the ESC to the program box via the sensor port, then adjust parameters like timing, throttle curve, and BEC voltage.
Is the ESC waterproof?
No, the ESC is not waterproof. Avoid exposure to water or mud. Use a waterproof enclosure if running in wet conditions.
What is the maximum current draw?
The ESC can handle 120A continuous current and 760A peak (for 1 second). Ensure your motor and battery do not exceed these limits.
Can I use a higher KV motor with this ESC?
The ESC supports motors up to 10000KV for 2S, but for 4S stick to 4000KV or lower to avoid overheating and overspeeding.
How do I calibrate the throttle?
1. Turn on transmitter with throttle at neutral. 2. Press and hold the SET button on ESC while connecting battery. 3. Wait for beeps, then release. 4. Pull full throttle and press SET; push full brake and press SET. 5. Neutral beep confirms calibration.
What cooling fan is included?
The ESC has a built-in 30mm active cooling fan (5V or 7.4V depending on BEC setting). Keep the fan free of debris.
Where can I find spare parts?
Spare parts such as replacement fans, capacitors, and sensor cables are available from Hobbywing dealers or online stores. Use genuine parts for reliability.
What is the warranty period?
Hobbywing typically offers a 1-year warranty against manufacturing defects. Proof of purchase required; does not cover damage from misuse or modification.
User questions about Xerun Bandit G2R Hobbywing
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control toy in PDF format for free! Find your manual Xerun Bandit G2R - Hobbywing and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Xerun Bandit G2R by Hobbywing.
USER MANUAL Xerun Bandit G2R Hobbywing
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hobbywing
Model : Xerun Bandit G2R
Category : Remote control toy