IGM-14104BT-1.25G - Network switch AIRLIVE - Free user manual and instructions
Find the device manual for free IGM-14104BT-1.25G AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Network Switch |
| Model | IGM-14104BT-1.25G |
| Brand | AirLive |
| Ports | 10 x 10/100/1000 PoE+ (up to 30W each) + 4 x Combo SFP/RJ45 |
| PoE Budget | 240W |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| MAC Address Table | 8K entries |
| VLAN Support | 802.1Q, up to 4K VLANs |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, Telnet, SSH |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (19-inch rackmount) |
| Weight | 3.2 kg |
| Power Supply | AC 100-240V, 50/60Hz internal |
| Power Consumption | Max 300W (with PoE load) |
| Cooling | Fan |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with a soft dry cloth; do not use liquids |
| Safety | Keep away from water and excessive heat; use only provided power cord |
| Spare Parts / Repairability | Contact AirLive support for service; no user-serviceable parts inside |
Frequently Asked Questions - IGM-14104BT-1.25G AIRLIVE
How do I reset the switch to factory defaults?
Press and hold the reset button on the front panel for about 10 seconds until the LEDs flash. The switch will reboot with factory settings.
What is the maximum PoE power per port?
Each PoE+ port can deliver up to 30W, with a total budget of 240W for all ports combined.
How to configure VLANs on the switch?
Access the web interface, go to 'VLAN' settings. You can create 802.1Q VLANs and assign ports accordingly. Save and apply.
Can I use SFP modules for fiber connections?
Yes, the switch has 4 combo SFP slots. Compatible SFP modules (e.g., 1000Base-SX/LX) can be used for uplink or additional fiber connections.
How do I update the firmware?
Download the latest firmware from AirLive's website. In the web interface, go to 'System' -> 'Firmware Upgrade', select the file, and upgrade. Do not power off during upgrade.
What management protocols are supported?
The switch supports SNMP v1/v2c/v3, RMON, Telnet, SSH, and HTTP/HTTPS web management.
Why are my PoE devices not powering on?
Check total PoE consumption (max 240W). Ensure devices are IEEE 802.3af/at compliant. Verify cable length and quality. Try a different port.
How to enable port mirroring?
In the web interface, go to 'Monitor' -> 'Port Mirroring'. Select the source port(s) and the destination port where traffic will be copied.
Can I mount the switch in a rack?
Yes, the switch is 19-inch rackmountable. Use the included rack-mount brackets and screws. Ensure proper ventilation.
What is the default IP address for management?
The default IP is 192.168.1.1 with subnet mask 255.255.255.0. Default login is 'admin'/'admin'.
User questions about IGM-14104BT-1.25G AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual IGM-14104BT-1.25G - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGM-14104BT-1.25G by AIRLIVE.
USER MANUAL IGM-14104BT-1.25G AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : IGM-14104BT-1.25G
Category : Network switch