IGM-14104BT-2.5G - Network switch AIRLIVE - Free user manual and instructions
Find the device manual for free IGM-14104BT-2.5G AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Network Switch |
| Model | IGM-14104BT-2.5G |
| Brand | AirLive |
| Number of Ports | 14 (10 x Gigabit + 4 x 2.5G) |
| PoE Standard | IEEE 802.3bt (PoE++) |
| PoE Budget | 400W |
| Switching Capacity | 56 Gbps |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 4.0 kg |
| Power Supply | Internal AC 100-240V, 50/60Hz |
| Management | Web, CLI, SNMP, VLAN, QoS, Link Aggregation |
| Cooling | Smart fan |
| Mounting | 19" rack-mountable |
| Operating Temperature | 0°C to 50°C |
| Cleaning Instructions | Use dry cloth; avoid liquids and abrasive cleaners |
| Safety Precautions | Disconnect power before cleaning; do not block vents |
| Spare Parts | Power supply unit, fan module (optional) |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - IGM-14104BT-2.5G AIRLIVE
How do I access the web interface of the switch?
Connect your computer to any port on the switch and set your IP to 192.168.1.x (e.g., 192.168.1.100). Open a web browser and go to 192.168.1.1. Use default credentials (admin/admin) to log in.
What are the power requirements and maximum consumption?
The switch operates on AC 100-240V, 50/60Hz. Maximum power consumption is 500W (including PoE output).
How can I update the firmware?
Download the latest firmware from the AirLive support website. Then, log into the web interface, go to System > Firmware Upgrade, select the file, and click Update. Do not power off during the process.
Can I use this switch without any configuration?
Yes, the switch works as a plug-and-play device out of the box. All ports are in the same VLAN (default) and PoE is enabled automatically for compliant devices.
How do I reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the system LED flashes. Release the button; the switch will reboot with factory settings.
What PoE devices are supported?
The switch supports IEEE 802.3bt (PoE++), delivering up to 100W per port. It is compatible with devices such as PTZ cameras, high-power access points, and PoE lighting.
How to configure VLANs on the switch?
Log into the web interface, go to VLAN Settings. Create a new VLAN ID, assign ports, and set tagging rules. For trunk ports, select Tagged; for access ports, select Untagged.
Does the switch have a silent operation?
No, the switch has a smart fan that adjusts speed based on temperature. Under normal load, it is relatively quiet but not silent.
Can I mount the switch on a wall?
No, the switch is designed for 19-inch rack mounting. It comes with rack ears. Wall mounting is not recommended as it may block ventilation.
What should I do if the switch does not power on?
Check the power cord connection and try a different outlet. Ensure the power switch at the back is turned on. If the LED is off, contact support for possible power supply replacement.
User questions about IGM-14104BT-2.5G AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual IGM-14104BT-2.5G - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGM-14104BT-2.5G by AIRLIVE.
USER MANUAL IGM-14104BT-2.5G AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : IGM-14104BT-2.5G
Category : Network switch