L3POE-2TX2406 - Uncategorized AIRLIVE - Free user manual and instructions
Find the device manual for free L3POE-2TX2406 AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Layer 3 PoE Switch |
| Model | L3POE-2TX2406 |
| Brand | AirLive |
| Ports | 2 x 10/100/1000Base-TX (PoE+) |
| PoE Standard | IEEE 802.3af/at (PoE+) |
| PoE Power Budget | 30W per port, total 60W |
| Switching Capacity | 8.8 Gbps |
| MAC Address Table | 8K entries |
| Dimensions (W x D x H) | 200 mm x 150 mm x 44 mm |
| Weight | 1.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 70W (max with PoE) |
| Management Features | VLAN, QoS, SNMP, STP, IGMP snooping, L3 routing |
| Mounting | Desktop or rack-mount (brackets included) |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with dry cloth; keep away from dust and moisture |
| Safety | Do not expose to water; ensure proper ventilation |
| Spare Parts / Repairability | Contact AirLive support for replacement parts |
| Included Accessories | Power cord, user manual, rackmount kit |
Frequently Asked Questions - L3POE-2TX2406 AIRLIVE
What is the default IP address to access the web interface?
The default IP address is 192.168.1.1. Ensure your computer is on the same subnet to access the management interface.
How do I reset the switch to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds until the system LED blinks rapidly. Release the button; the switch will reboot with factory settings.
Can I use this switch to power devices like IP cameras?
Yes, the switch supports IEEE 802.3af/at PoE+ on both ports, delivering up to 30W per port, sufficient for most IP cameras, VoIP phones, and access points.
Does it support VLAN configuration?
Yes, the switch supports 802.1Q VLAN with up to 256 VLAN groups. You can configure port-based or tag-based VLANs through the web interface.
What is the maximum cable length for PoE?
The maximum cable length for PoE is 100 meters (328 feet) using standard Cat5e or better cable.
Can I mount this switch on a wall?
The switch is designed for desktop or rack-mount use. Wall mounting is not officially supported, but you can use the provided rackmount brackets alternatively.
Is it possible to update the firmware?
Yes, firmware updates are available from the AirLive support website. Download the latest firmware and upload it via the System > Firmware Upgrade section in the web interface.
What power cord does it use?
The switch uses a standard IEC C13 power cord, rated 10A/250V. Connect to a grounded AC outlet.
How do I check PoE power status?
You can view PoE power consumption and status per port in the web interface under PoE Configuration > PoE Status. The LEDs on the front panel also indicate PoE activity.
Does it support Layer 3 routing?
Yes, this is a Layer 3 switch and supports static routing and inter-VLAN routing. Configuration can be done via the web interface or CLI.
User questions about L3POE-2TX2406 AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual L3POE-2TX2406 - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. L3POE-2TX2406 by AIRLIVE.
USER MANUAL L3POE-2TX2406 AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : L3POE-2TX2406
Category : Uncategorized