GV-IPSS400 - Uncategorized Geovision - Free user manual and instructions
Find the device manual for free GV-IPSS400 Geovision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Surveillance Server (NVR) |
| Brand | Geovision |
| Model | GV-IPSS400 |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 430 x 350 x 44 mm |
| Weight | Approx. 5 kg |
| Power Supply | 100-240V AC, 50/60 Hz |
| Power Consumption | ≤ 60W |
| Main Functions | Video recording, live viewing, playback, motion detection, remote access |
| Video Channels | Up to 16 IP cameras |
| Storage | Supports 1 x 3.5" SATA HDD (not included) |
| Network Interface | 1 x Gigabit Ethernet port |
| Operating System | Embedded Linux |
| Cooling | Fan cooled |
| Maintenance | Clean exterior with dry cloth; avoid liquids |
| Safety Certifications | CE, FCC Class A |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Spare Parts / Repairability | User-replaceable HDD; power supply unit replaceable by technician |
| Included Accessories | Power cable, software CD, quick start guide |
Frequently Asked Questions - GV-IPSS400 Geovision
How do I access my GV-IPSS400 remotely?
Ensure the device is connected to the internet and port forwarding is configured on your router. Use the GV-IP Device Utility or a web browser with the device's IP address. For secure access, enable SSL and use strong passwords.
What hard drive is compatible with the GV-IPSS400?
The GV-IPSS400 supports standard 3.5-inch SATA hard drives. For 24/7 recording, use surveillance-grade drives like WD Purple or Seagate SkyHawk. Maximum capacity is typically 10TB, but check the manual.
Can I use the GV-IPSS400 with any IP camera?
It is designed to work with Geovision IP cameras and many ONVIF-compliant cameras. For best performance, use recommended models. Third-party cameras may require manual configuration.
How do I reset the GV-IPSS400 to factory defaults?
Locate the reset button on the rear panel. Press and hold it for 10 seconds while the device is powered on. The device will reboot with default settings. Note that this erases all configurations.
What is the maximum recording resolution?
The GV-IPSS400 supports up to 8MP (4K) cameras depending on the model. Actual recording resolution and frame rate depend on the camera and bandwidth settings.
How many cameras can be connected to the GV-IPSS400?
It supports up to 16 IP camera channels. However, performance may vary if all channels are used at high resolution and frame rate. Ensure network bandwidth is sufficient.
Does the GV-IPSS400 support motion detection?
Yes, it includes built-in motion detection functionality. You can configure motion zones and sensitivity per camera. Alerts can be sent via email or push notification.
How do I update the firmware on my GV-IPSS400?
Download the latest firmware from the Geovision support website. Access the device web interface, go to System > Firmware Update, upload the file, and follow prompts. Do not power off during update.
What is the warranty period for the GV-IPSS400?
Typically, Geovision offers a limited 2-year warranty. Check your purchase receipt or contact Geovision for exact terms. Extended warranties may be available.
Can I record audio with the GV-IPSS400?
Audio recording is supported if the connected camera has a microphone and audio is enabled. The GV-IPSS400 can record audio tracks alongside video. Ensure proper audio codec settings.
User questions about GV-IPSS400 Geovision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual GV-IPSS400 - Geovision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV-IPSS400 by Geovision.