GV-BX2500-2F - Security Camera Geovision - Free user manual and instructions
Find the device manual for free GV-BX2500-2F Geovision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Geovision |
| Model | GV-BX2500-2F |
| Resolution | 1920 x 1080 (2MP) |
| Image Sensor | 1/2.7" Progressive CMOS |
| Lens Type | Varifocal Lens (2.8 - 12 mm) |
| Night Vision | Yes, IR LEDs (up to 30 m) |
| Power Supply | PoE (IEEE 802.3af) / DC 12V |
| Power Consumption | PoE: 5.5W (approx.) |
| Protection Rating | IP67 |
| Housing Material | Aluminum / Metal |
| Dimensions (W x H x D) | 70 x 70 x 150 mm (approx.) |
| Weight | 0.8 kg (approx.) |
| Video Compression | H.265 / H.264 / MJPEG |
| Frame Rate | Up to 30 fps (at 1080p) |
| Connectivity | 10/100 Mbps Ethernet (RJ45) |
| Operating Temperature | -40°C to 50°C |
| Storage | MicroSD card slot (up to 256GB) |
| Motion Detection | Yes, with configurable zones |
| Privacy Mask | Yes, supports multiple windows |
| Mobile App Support | GeoVision VMS / Guarding Vision |
| In the Box | Camera, Mounting Bracket, Screws, Quick Guide |
| Maintenance | Clean lens with a soft, dry cloth |
| Safety Features | Password Protection, HTTPS Encryption |
| Reparability | Spare parts available from manufacturer |
Frequently Asked Questions - GV-BX2500-2F Geovision
How do I reset the GV-BX2500-2F to factory defaults?
To reset your camera, locate the reset button on the rear panel. Press and hold it for about 10 seconds while the camera is powered on. The camera will reboot and restore all settings to default. The default username is admin and the default password is the one set during initial setup, but after reset, you can use the default credentials from the quick guide.
What is the default IP address of the camera?
The default IP address is 192.168.0.100. Ensure your computer is on the same subnet (e.g., 192.168.0.x) and then access the camera via a web browser. You can also use the GeoVision IP Finder utility to locate the camera on your network.
How can I connect the camera to my Wi-Fi network?
This model is a wired PoE camera with an RJ45 Ethernet port. It does not support Wi-Fi out of the box. However, you can use a PoE-enabled switch or a Wi-Fi adapter with a bridge to connect it wirelessly. For best performance, we recommend a wired Ethernet connection.
How do I update the firmware on the GV-BX2500-2F?
Download the latest firmware file from the Geovision website. Follow these steps: log in to the camera's web interface, go to Maintenance > Firmware Upgrade, upload the file, and wait for the process to complete. Do not disconnect power during the update. After the upgrade, the camera will reboot automatically.
Why is my camera not showing live video?
Common causes include incorrect IP configuration, firewall blocking, or damaged network cables. First, check the Ethernet cable connection and ensure the indicator LEDs are on. Use the GeoVision IP Finder to see if the camera is detected. If not, try a different cable or port. Also, verify that the CMOS sensor is not covered.
Can I use the camera outdoors?
Yes, the GV-BX2500-2F is rated IP67, which means it is more than waterproof and dustproof. It can operate in temperatures from -40°C to 50°C. For optimal performance, use the included bracket for wall mounting and ensure the cable connections are properly sealed.
How do I set up motion detection alerts?
In the camera's web interface, navigate to Events > Motion Detection. Enable the feature, draw detection zones on the preview image, and set the sensitivity. Then go to Alerts or Notification settings to define how you want to receive alerts (e.g., email, FTP). Configure SMTP and server details if using email alerts.
How can I access the camera remotely?
To access remotely, set up port forwarding on your router for HTTP (80) or RTSP (554) and geovision cloud service. Alternatively register the camera to the GeoVision VMS cloud or use the Guarding Vision app for easy remote access without complex network settings. Always ensure strong passwords for security.
What microSD card is recommended?
For local storage, use a microSDHC or microSDXC card with UHS-I speed class U1 or higher and capacity up to 256GB. Recommended brands include SanDisk, Samsung, and Kingston. Format the card in the camera to FAT32 or exFAT for optimal compatibility.
How do I mount the camera correctly?
Mount the camera on a solid surface using the included bracket. Position it away from direct sunlight and strong artificial light to prevent glare. Aim the lens at the desired area, and tighten the three screws for pan and tilt adjustments after focusing. Make sure the cable outlet is sealed with waterproof tape or a junction box.
User questions about GV-BX2500-2F Geovision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual GV-BX2500-2F - Geovision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV-BX2500-2F by Geovision.
USER MANUAL GV-BX2500-2F Geovision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Geovision
Model : GV-BX2500-2F
Category : Security Camera