GV-MFD3401-5F - Security Camera Geovision - Free user manual and instructions
Find the device manual for free GV-MFD3401-5F Geovision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Geovision |
| Model | GV-MFD3401-5F |
| Sensor | 1/2.8-inch Progressive Scan CMOS |
| Resolution | 5 Megapixels (2560 x 1920) |
| Lens Type | Fixed 2.8mm F1.6 |
| Night Vision | IR LEDs for visibility up to 30m |
| Power Supply | Power over Ethernet (PoE), 12V DC |
| Dimensions | Φ140mm x 110mm |
| Weight | 0.8 kg |
| Housing | Vandal-resistant aluminum |
| Compression | H.264 and H.265 |
| Connectivity | RJ45 Ethernet port |
| Storage | MicroSD card slot up to 256GB |
| Weatherproof | IP67-rated |
| Operating Temperature | -30°C to 60°C |
| Certifications | CE, FCC |
| Maintenance | Clean dome with soft, dry cloth |
| Security | WPA2, HTTPS, multiple user access levels |
| Spare Parts & Repairability | Replacement parts available via Geovision support |
| General Information | Warranty: 2 years |
Frequently Asked Questions - GV-MFD3401-5F Geovision
How do I reset the Geovision GV-MFD3401-5F to factory defaults?
Press and hold the Reset button on the camera for 10 seconds while it is powered on. The camera will reboot with factory settings restored. Alternatively, you can reset via the web interface by navigating to Maintenance > Factory Default.
How do I connect the camera to my network?
Connect an Ethernet cable from your router or PoE switch to the RJ45 port on the camera. Use the Geovision IP Finder tool to identify the camera's IP address on your network. Then access it via a web browser for initial setup.
Can I access the camera remotely over the internet?
Yes, the camera supports DDNS and remote access via the Geovision app. Configure port forwarding on your router or use the Geovision P2P service for easier remote access without static IP.
What is the default IP address of the camera?
The default IP address is 192.168.0.100. If this does not work, use the Geovision IP Finder utility to locate the camera on your network and assign a new IP address.
How do I set up motion detection alerts?
Log into the camera's web interface, go to Event Settings > Motion Detection, and define detection zones. You can configure the camera to send email notifications or upload images to an FTP server when motion is detected.
How do I update the firmware?
Download the latest firmware from the Geovision website for the GV-MFD3401-5F model. In the web interface, go to Maintenance > Firmware Upgrade, select the file, and click Upgrade. Do not disconnect power during the process.
Is this camera weatherproof?
Yes, the camera has an IP67 rating, meaning it is fully protected against dust and can withstand temporary immersion in water. It is suitable for outdoor use.
Can I use a microSD card for local recording?
Yes, insert a microSD card (up to 256GB) into the camera's slot. Enable SD card recording in the web interface under Storage Management. The camera supports continuous and event-based recording.
How should I clean the camera lens?
Use a soft, dry microfiber cloth to gently wipe the dome and lens. Avoid using harsh chemicals or abrasive materials. For stubborn dirt, slightly dampen the cloth with water or lens cleaning solution and wipe carefully.
What power supply do I need for the camera?
The camera supports Power over Ethernet (PoE) 802.3af or 12V DC input. If using PoE, a standard PoE switch or injector is sufficient. For DC power, use a regulated 12V adapter with proper polarity.
User questions about GV-MFD3401-5F Geovision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual GV-MFD3401-5F - Geovision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV-MFD3401-5F by Geovision.