GV-EL124S - Uncategorized Geovision - Free user manual and instructions
Find the device manual for free GV-EL124S Geovision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | GV-EL124S |
| Brand | Geovision |
| Resolution | 1.3 Megapixels (1280 x 1024) |
| Lens Type | Fixed focal length, 4mm |
| Night Vision | Up to 30m distance |
| Video Compression | H.264, MJPEG |
| Power Supply | 12V DC, PoE (802.3af) |
| Power Consumption | Max 6W |
| Dimensions (W x H x D) | 70 x 200 x 70 mm |
| Weight | 500 g |
| Operating Temperature | -10°C to 50°C |
| Ingress Protection | IP66 |
| Audio Support | Two-way audio (built-in mic and speaker) |
| Storage | MicroSD card up to 128GB, NVR |
| Mount Type | Wall mount, ceiling mount |
| Field of View | Horizontal: 72°, Vertical: 55° |
| Maintenance | Clean lens with soft dry cloth; avoid direct water spray |
| Safety | Class I equipment; use with certified power adapter |
| Spare Parts | Replacement mounts, cables, power adapter available |
Frequently Asked Questions - GV-EL124S Geovision
How do I reset the GV-EL124S to factory defaults?
Press and hold the reset button on the camera for 10 seconds while power is connected. The camera will reboot with default settings. Note: This erases all custom configurations.
What is the default IP address of the GV-EL124S?
The default IP address is 192.168.0.10. Use the IP Finder tool provided by Geovision to locate the camera on your network if the address was changed.
Can the GV-EL124S record audio?
Yes, the camera has a built-in microphone and supports two-way audio. You can enable audio recording in the camera settings via the web interface or GV-System.
How do I connect the GV-EL124S to a PoE switch?
Connect an Ethernet cable from the camera to a PoE-enabled switch port. The camera supports IEEE 802.3af PoE, so no separate power supply is needed. Ensure the switch provides adequate power.
What is the maximum SD card size supported?
The GV-EL124S supports microSD cards up to 128GB (Class 10 or UHS-1). Format the card to FAT32 before use.
How do I access the camera remotely?
Enable UPnP on the camera and your router, or forward port 80 and 443 on your router. Use the Geovision DDNS service or a static IP to access via the GV-NVR or web browser.
Does the camera work with third-party NVRs?
Yes, the GV-EL124S supports ONVIF Profile S and RTSP protocols, allowing integration with most third-party NVRs. Ensure the NVR is compatible with H.264 video streams.
How do I clean the camera lens?
Use a soft, lint-free microfiber cloth slightly dampened with lens cleaning solution. Gently wipe the lens in a circular motion. Avoid using abrasive cleaners or paper towels.
What is the warranty period for the GV-EL124S?
Geovision typically offers a 3-year limited warranty. Register your product on the Geovision website to activate warranty coverage.
Can I use the camera outdoors?
Yes, the camera has an IP66 rating, meaning it is dust-tight and protected against heavy water jets. It is suitable for outdoor installation in covered or exposed areas.
User questions about GV-EL124S Geovision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual GV-EL124S - Geovision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV-EL124S by Geovision.
USER MANUAL GV-EL124S Geovision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Geovision
Model : GV-EL124S
Category : Uncategorized