GV-IPSH30 V2 - Uncategorized Geovision - Free user manual and instructions
Find the device manual for free GV-IPSH30 V2 Geovision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Brand | Geovision |
| Model | GV-IPSH30 V2 |
| Resolution | 3 Megapixels (2048 x 1536) |
| Lens | Fixed focal, 4.0 mm, F1.8 |
| Night Vision | IR LEDs up to 30 meters |
| Video Compression | H.265, H.264, MJPEG |
| Power Supply | PoE (802.3af) or DC 12V |
| Power Consumption | Typically 5-7 W |
| Dimensions | 70 x 70 x 150 mm (approx.) |
| Weight | Approx. 350 g |
| IP Rating | IP66 (weatherproof) |
| Operating Temperature | -20°C to 50°C |
| Main Functions | Motion detection, tampering alarm, IR cut filter, day/night mode |
| Maintenance & Cleaning | Clean lens with soft cloth; avoid moisture; check cables periodically |
| Safety | Use only certified power adapters; install per local electrical codes |
| Spare Parts & Repairability | Replaceable IR LED board, lens, and main board; contact Geovision support |
| Included Accessories | Mounting kit, quick start guide, CD with software |
Frequently Asked Questions - GV-IPSH30 V2 Geovision
How do I reset the GV-IPSH30 V2 to factory defaults?
Press and hold the reset button (usually located near the cable) for 10 seconds until the LED blinks. The camera will reboot with default settings.
What software is needed to view the camera?
Use Geovision's GV-IPViewer or GV-NVR software. Alternatively, it can be accessed via a web browser using IP address.
Does the camera support audio?
The GV-IPSH30 V2 has a built-in microphone for audio recording, but no speaker for two-way audio.
Can I use this camera outdoors?
Yes, it has an IP66 weatherproof rating, suitable for outdoor use in rain and dust.
How do I connect the camera to my network?
Connect via Ethernet cable using PoE or a separate power adapter. Use the GV-IPFinder tool to discover the camera's IP address on your network.
What is the maximum SD card capacity?
The camera supports microSD cards up to 128 GB for local recording.
How do I update the firmware?
Download the latest firmware from Geovision's website, log into the camera's web interface, and navigate to Maintenance > Firmware Upgrade.
Why is the night vision not working?
Check if IR LEDs are enabled in the camera settings. Ensure the camera is not obstructed by reflective surfaces. If still not working, the IR board may need replacement.
Can I mount the camera on a ceiling?
Yes, the included bracket allows ceiling or wall mounting. Ensure screws are secure and the camera is positioned correctly.
Does the camera have motion detection alerts?
Yes, it supports motion detection with configurable sensitivity and zones. Alerts can be sent via email or FTP.
User questions about GV-IPSH30 V2 Geovision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual GV-IPSH30 V2 - Geovision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV-IPSH30 V2 by Geovision.
USER MANUAL GV-IPSH30 V2 Geovision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Geovision
Model : GV-IPSH30 V2
Category : Uncategorized