ADDERLink AV200 - AV Extender Adder - Free user manual and instructions
Find the device manual for free ADDERLink AV200 Adder in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Extender |
| Brand | Adder |
| Model | ADDERLink AV200 |
| Dimensions (W x D x H) | 200 mm x 120 mm x 30 mm |
| Weight | 0.8 kg |
| Power Supply | External 12V DC adapter |
| Video Input | DVI-I (digital and analog) |
| Audio Input | 3.5 mm stereo jack |
| Video Output | DVI-I (digital and analog) |
| Audio Output | 3.5 mm stereo jack |
| Resolution Support | Up to 1920 x 1200 @ 60 Hz |
| Transmission Distance | Up to 300 m over CAT5e/6 |
| Cable Type | CAT5e, CAT6, CAT7 |
| Connectors | DVI-I, 3.5 mm audio, RJ45, power |
| LED Indicators | Power, Link, Activity |
| EDID Support | Yes, pass-through and emulation |
| Equalization | Automatic cable equalization |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with a soft dry cloth. Do not use liquids. |
| Safety | Use only provided power adapter. Do not open unit. Avoid electrical shock. |
| Repairability | No user-serviceable parts. Contact support for repairs. |
Frequently Asked Questions - ADDERLink AV200 Adder
How do I connect the ADDERLink AV200?
Connect the DVI source to the transmitter's DVI input and the monitor to the receiver's DVI output. Use CAT5e/6 cable to link the transmitter and receiver. Power both units with the included 12V DC adapters.
What is the maximum transmission distance?
The maximum distance is 300 meters (984 feet) over CAT5e or CAT6 cable at resolutions up to 1920x1200.
Does the ADDERLink AV200 support 4K resolution?
No, the AV200 supports resolutions up to 1920x1200 @ 60 Hz. For 4K, consider the ADDERLink AV400 or higher models.
Can I connect a VGA source to the AV200?
Yes, using a VGA to DVI-I adapter (not included). The DVI-I input accepts both digital (DVI-D) and analog (VGA) signals.
How is the device powered?
Each unit is powered by an external 12V DC power adapter (included). Ensure the power LED lights up after connection.
What cables are required?
You need a DVI cable from source to transmitter, a DVI cable from receiver to display, and a CAT5e/6/7 cable between the two units. Audio connections use standard 3.5 mm stereo cables.
The link LED is off. What should I check?
First, verify that the CAT cable is properly connected and not damaged. Ensure both units are powered. If the problem persists, try a shorter cable or a different CAT5e/6 cable. The link LED should be solid green when a valid connection is established.
Is the AV200 compatible with all monitors?
It works with most DVI and VGA monitors (using adapter). Some monitors may require EDID adjustment; the AV200 supports EDID pass-through and emulation to ensure compatibility.
How can I adjust video quality?
The AV200 features automatic cable equalization to compensate for signal loss over long distances. For optimal quality, use high-quality CAT6 cable and keep connections tight. No manual adjustment is needed.
How do I reset the ADDERLink AV200?
There is no hardware reset button. To reset, power cycle the units by disconnecting and reconnecting the power adapters. If issues persist, contact Adder support.
User questions about ADDERLink AV200 Adder
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your AV Extender in PDF format for free! Find your manual ADDERLink AV200 - Adder and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADDERLink AV200 by Adder.
USER MANUAL ADDERLink AV200 Adder
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Adder
Model : ADDERLink AV200
Category : AV Extender