EI600LAC - Uncategorized INTERMATIC - Free user manual and instructions
Find the device manual for free EI600LAC INTERMATIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Timer / Photocontrol |
| Brand | Intermatic |
| Model | EI600LAC |
| Dimensions (H x W x D) | 4.0 x 2.0 x 2.0 inches |
| Weight | 0.3 lbs |
| Power Supply | 120 VAC, 60 Hz |
| Maximum Load (Incandescent) | 1800 Watts |
| Maximum Load (LED/CFL) | 400 Watts |
| Maximum Load (Motor) | 1/2 HP |
| Programmable Events | Up to 7 day schedule with multiple ON/OFF events |
| Photocell Feature | Yes, automatic dusk-to-dawn operation |
| Battery Backup | Yes, retains program during power outage |
| Display Type | Digital LCD with backlight |
| Mounting | Wall box mount (fits standard 1-gang box) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Indoor/Outdoor Use | Indoor / Outdoor with weatherproof cover |
| Certifications | UL Listed, CSA Certified |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids. |
| Safety Warnings | Turn off power at circuit breaker before installation. Consult electrician if unsure. |
| Replaceable Battery | Yes, 9V alkaline battery (not included) |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - EI600LAC INTERMATIC
How do I install the EI600LAC timer?
Turn off power at the circuit breaker. Remove existing switch and connect the timer wires to the line (black), load (red), and neutral (white) using wire nuts. For three-way setups, follow the included diagram. Mount the timer in the wall box and restore power.
Can the EI600LAC be used outdoors?
Yes, but it must be installed in a weatherproof enclosure or under a covered area. The timer itself is not rated for direct exposure to rain.
How do I program the on/off times?
Press the MENU button to enter programming mode. Use the ON/OFF buttons to set the time and days. The screen will guide you through setting up to 2 events per day. See the manual for custom schedules.
What does the 'Dusk-to-Dawn' mode do?
This mode uses the built-in photocell to automatically turn the load on at dusk and off at dawn. It overrides any timer settings when activated. Press MODE to select it.
Why is the display not showing anything?
Check if the circuit breaker is on. If the display is blank, the internal battery may be dead. Replace the 9V battery (located behind the front panel) while AC power is on.
How do I reset the timer to factory defaults?
Press and hold the RESET button (usually a small hole on the side) for 5 seconds with a paperclip. All settings will clear and the display will show the default time.
What is the maximum load for LED bulbs?
The maximum load for LED bulbs is 400 watts (or 3.3 amps at 120V). Exceeding this may damage the timer. For incandescent, max is 1800 watts.
Does the timer retain settings during a power outage?
Yes, the unit has a battery backup that saves the program and clock. The battery lasts about 1 year. If the battery is dead, the timer will reset to default when power is restored.
Can I use this timer with a three-way switch?
Yes, the EI600LAC supports three-way applications. You will need an additional compatible remote switch (sold separately). Follow the wiring diagram for three-way setups.
How do I clean the timer?
Clean the exterior with a soft, dry cloth. Do not use any liquids, sprays, or abrasive cleaners. Ensure power is off before cleaning around the terminals.
User questions about EI600LAC INTERMATIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EI600LAC - INTERMATIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EI600LAC by INTERMATIC.