ET2145CP - Uncategorized INTERMATIC - Free user manual and instructions
Find the device manual for free ET2145CP INTERMATIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Time Switch |
| Model | ET2145CP |
| Brand | Intermatic |
| Voltage Rating | 120 VAC, 60 Hz |
| Load Rating | 15 A (resisitive), 8 A (inductive) |
| Switch Type | Single Pole Single Throw (SPST) |
| Number of Programs | 7-day independent programming |
| Programmable Events | Up to 4 ON/OFF events per day |
| Display Type | LCD with backlight |
| Battery Backup | Yes (CR2032, keeps time during power loss) |
| Power Consumption | Less than 2 W |
| Operating Temperature | -10 to 50°C (14 to 122°F) |
| Enclosure Material | Plastic (UL 94V-0 rated) |
| Dimensions (W x H x D) | 2.7 x 4.7 x 1.4 inches (6.9 x 11.9 x 3.6 cm) |
| Weight | 0.3 lbs (0.14 kg) |
| Mounting | Wall box or surface mount |
| Wiring | 4 wires: Line, Neutral, Load, Ground |
| ASTM Safety Rating | UL listed, CSA certified |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Repairability | Replaceable battery; no user-serviceable parts otherwise |
| Warranty | Limited 1-year warranty |
Frequently Asked Questions - ET2145CP INTERMATIC
How do I set the time and date on the Intermatic ET2145CP?
Press and hold the SET button for 3 seconds. Use the + and - buttons to adjust the year, month, day, hour, and minute. Press SET to confirm each step.
How many ON/OFF events can I program per day?
You can program up to 4 ON/OFF events per day, with independent times for each day of the week.
What happens if the power goes out?
The timer has a CR2032 battery backup that retains the time and program settings for up to 2 years. After power returns, the timer will continue normal operation.
How do I reset the timer to factory defaults?
Press and hold the RESET button (located behind the front cover) with a paper clip for 5 seconds. All settings will be erased and the timer will restart.
Can the ET2145CP control both lights and motors?
Yes, it can control resistive loads (lights, heaters) up to 15A and inductive loads (motors, fans) up to 8A.
What does the LCD display show?
The display shows the current time, day of the week, and the next programmed event. It also indicates whether the output is ON or OFF.
How do I override the programmed schedule manually?
Press the MANUAL button to toggle the output on or off regardless of the program. The override will last until the next programmed event or until you press MANUAL again.
Is the ET2145CP suitable for outdoor use?
The timer is designed for indoor use only. It should be installed in a weatherproof enclosure if used outdoors.
What are the dimensions of the device?
The timer measures approximately 2.7 x 4.7 x 1.4 inches (6.9 x 11.9 x 3.6 cm) and fits standard wall boxes.
How do I replace the backup battery?
Remove the front cover, locate the battery holder, and replace the CR2032 battery with a new one. Ensure correct polarity. Dispose of old battery properly.
User questions about ET2145CP INTERMATIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ET2145CP - INTERMATIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ET2145CP by INTERMATIC.
USER MANUAL ET2145CP INTERMATIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INTERMATIC
Model : ET2145CP
Category : Uncategorized