FM1D20E - Uncategorized INTERMATIC - Free user manual and instructions
Find the device manual for free FM1D20E INTERMATIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Time Switch |
| Model Number | FM1D20E |
| Brand | Intermatic |
| Rating | 20 Amps, 120-240 VAC, 50/60 Hz |
| Number of Circuits | 1 Single Pole Single Throw (SPST) |
| Timer Range | 24-hour with up to 28 ON/OFF events |
| Minimum ON/OFF Time | 1 minute |
| Power Supply | 120-240 VAC (no neutral required) |
| Power Consumption | 1.5 Watts (max) |
| Dimensions (H x W x D) | 4.5 x 2.75 x 2.35 inches (114 x 70 x 60 mm) |
| Weight | 0.5 lbs (0.23 kg) |
| Enclosure Material | Plastic, NEMA 1 rated |
| Operating Temperature | -40°F to 140°F (-40°C to 60°C) |
| Wiring Connections | Line, Load, Ground (green wire) |
| Main Functions | Automatic ON/OFF switching, programmable schedule, manual override |
| Maintenance | Wipe with dry cloth; no user-serviceable parts |
| Safety Certifications | UL Listed, CSA Certified |
| Spare Parts & Repairability | Not user-repairable; replace unit if defective |
| Warranty | 1 Year Limited Warranty |
Frequently Asked Questions - FM1D20E INTERMATIC
What is the Intermatic FM1D20E?
The Intermatic FM1D20E is an electronic time switch that can control lighting, pumps, and other electrical loads up to 20 Amps. It allows you to program up to 28 ON/OFF events per day.
How do I wire the FM1D20E?
Connect the line (hot) wire to the black wire, the load wire to the red wire, and the ground wire to the green wire. No neutral is required. Ensure power is off before wiring.
Can I use the FM1D20E with LED lights?
Yes, it can control LED lights as long as the total load does not exceed 20 Amps. However, for electronic loads, ensure compatibility with the timer's switching characteristics.
How do I program the timer?
Use the four buttons: PROG, EVENT, +, -. Press PROG to enter programming mode, select event number, then set time and ON/OFF. Press PROG again to save.
What does the manual override button do?
The manual override button toggles the load ON or OFF regardless of the programmed schedule. Pressing it once will override until the next scheduled event.
How many events can I set on the FM1D20E?
You can set up to 28 events (ON or OFF) in a 24-hour period, allowing for complex schedules.
Does the timer have a battery backup?
Yes, it has a built-in battery (rechargeable NiMH) that maintains the time and program settings for up to 4 hours during a power outage.
What is the minimum ON or OFF time?
The minimum ON or OFF time is 1 minute. Programmed intervals must be at least 1 minute apart.
Why is my FM1D20E not turning on the load?
Check wiring connections, ensure the load is not overloaded, and verify that the timer is programmed correctly. Also, check if the manual override is in the correct position.
Can I install the FM1D20E outdoors?
The FM1D20E is rated for indoor use only (NEMA 1). For outdoor use, install it in a weatherproof enclosure.
User questions about FM1D20E INTERMATIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FM1D20E - INTERMATIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FM1D20E by INTERMATIC.
USER MANUAL FM1D20E INTERMATIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INTERMATIC
Model : FM1D20E
Category : Uncategorized