VS-44HDxl - Video switch Kramer - Free user manual and instructions
Find the device manual for free VS-44HDxl Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4x4 HDMI Matrix Switcher |
| Model | VS-44HDxl |
| Brand | Kramer |
| Video Inputs | 4x HDMI |
| Video Outputs | 4x HDMI |
| Max Resolution | 4K@60Hz (4:4:4) |
| HDCP Support | HDCP 2.2 |
| Control Interfaces | RS-232, IR, Ethernet (TCP/IP) |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 25W max |
| Dimensions (W x D x H) | 19 x 7.2 x 1.7 inches (483 x 183 x 43 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Key Features | Seamless switching, EDID management, Audio de-embedding |
| Compliance | CE, FCC, RoHS |
| Maintenance | Keep vents clean; wipe with dry cloth |
| Safety | Use grounded outlet; avoid liquid exposure |
Frequently Asked Questions - VS-44HDxl Kramer
How do I connect the Kramer VS-44HDxl to my display?
Use high-quality HDMI cables. Connect sources to inputs 1-4 and displays to outputs 1-4. Power on the switcher, then select the desired input via front panel, IR remote, or RS-232 commands.
What is the maximum resolution supported?
The VS-44HDxl supports resolutions up to 4K@60Hz with 4:4:4 chroma subsampling, including HDR10 and Dolby Vision pass-through.
Does this matrix switcher support HDCP 2.2?
Yes, it supports HDCP 2.2 on all inputs and outputs, ensuring compatibility with 4K Blu-ray players and streaming devices.
How can I control the switcher remotely?
You can control it via RS-232 serial commands, IR remote (included), or Ethernet using TCP/IP. Use Kramer's control software or integrate with third-party systems.
Can I switch audio separately?
The VS-44HDxl features audio de-embedding on the output. You can extract audio via the SPDIF or analog audio outputs, but it does not allow independent audio routing.
What is EDID management?
EDID management ensures the source receives the correct display capabilities. The VS-44HDxl offers automatic, default, and user-defined EDID modes to prevent handshake issues.
How do I reset the switcher to factory defaults?
Press and hold the reset button on the rear panel for 10 seconds, or issue a factory reset command via RS-232. This clears all settings and EDID configurations.
Does it support 3D video?
Yes, the switcher passes HDMI 1.4 3D formats up to 1080p. For 4K 3D, ensure your source and display support it.
What type of power supply does it use?
It uses an internal power supply with an IEC C14 inlet. The input voltage range is 100-240V AC, 50/60Hz. Power consumption is typically 25W.
How do I update the firmware?
Firmware updates are done via the Ethernet port using Kramer's K-Config tool. Download the latest firmware from Kramer's website and follow the instructions in the manual.
User questions about VS-44HDxl Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video switch in PDF format for free! Find your manual VS-44HDxl - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VS-44HDxl by Kramer.
USER MANUAL VS-44HDxl Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : VS-44HDxl
Category : Video switch