Alpine 060 - Faucet Billi - Free user manual and instructions
Find the device manual for free Alpine 060 Billi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Faucet |
| Brand | Billi |
| Model | Alpine 060 |
| Material | Brass with chrome finish |
| Mounting Type | Deck mount |
| Holes Required | 1 hole |
| Spout Height | Approximately 150 mm (6 in) |
| Spout Reach | Approximately 120 mm (4.7 in) |
| Overall Height | Approximately 280 mm (11 in) |
| Weight | 1.2 kg (2.6 lbs) |
| Flow Rate | 6 L/min at 3 bar |
| Water Pressure Recommended | 1 - 5 bar |
| Connection Size | 1/2 inch BSP |
| Valve Type | Ceramic disc cartridge |
| Operation | Single lever |
| Installation | DIY friendly, step-by-step guide in manual |
| Maintenance | Regular surface cleaning with damp cloth; avoid abrasives |
| Cleaning Instructions | Use mild soap and water; rinse and dry thoroughly |
| Safety Notes | Do not use caustic cleaners; avoid excessive force on handle |
| Spare Parts Availability | Official Billi spare parts available; cartridge, aerator, handle |
| Warranty | 5 years against manufacturing defects |
| Compliance | WaterMark certified |
Frequently Asked Questions - Alpine 060 Billi
How do I install the Billi Alpine 060 faucet?
Follow the included step-by-step manual. Typically, mount the faucet through the sink hole, secure with nut, and connect supply lines. Ensure water is turned off before installation.
What is the recommended water pressure for this faucet?
The faucet works best with water pressure between 1 and 5 bar. Lower pressure may reduce flow; higher may cause noise or damage.
How do I clean the Alpine 060 faucet?
Use a soft damp cloth with mild soap. Rinse with clean water and dry. Avoid abrasive cleaners or scouring pads to preserve the chrome finish.
Can I install this faucet on a single-hole sink?
Yes, the Alpine 060 is designed for single-hole installation. It requires a hole diameter of approximately 35 mm (1 3/8 in).
What if the faucet leaks from the base?
Tighten the mounting nut under the sink. If leak persists, the o-ring may need replacement. Consult the manual for spare parts.
How do I replace the cartridge?
Shut off water, remove the handle (prise off cap, unscrew screw), then unscrew the cartridge retaining nut and pull out cartridge. Install new one and reassemble.
Does the faucet come with supply hoses?
Yes, the Alpine 060 includes flexible supply hoses with 1/2 inch BSP connections. Length is typically 400 mm.
Is this faucet suitable for outdoor use?
No, it is intended for indoor use only. Exposure to weather may damage the finish and internal components.
What should I do if the handle becomes stiff?
The cartridge may be worn. Lubricate the cartridge with silicone grease or replace it if stiffness persists.
Where can I purchase replacement parts?
Official Billi spare parts are available from authorized dealers or online. Use the model number Alpine 060 to ensure compatibility.
User questions about Alpine 060 Billi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual Alpine 060 - Billi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Alpine 060 by Billi.
USER MANUAL Alpine 060 Billi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Billi
Model : Alpine 060
Category : Faucet