DPDM-10-30-PA - Drill Festo - Free user manual and instructions
Find the device manual for free DPDM-10-30-PA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Drill |
| Model | DPDM-10-30-PA |
| Brand | Festo |
| Chuck Capacity | 10 mm (0.39 in) |
| Max. Stroke | 30 mm (1.18 in) |
| Operating Pressure | 6 bar (87 psi) |
| Air Consumption | Approx. 0.5 l/s at 6 bar |
| Max. Speed | 2000 rpm |
| Dimensions (L x Ø) | 250 mm x 80 mm (9.84 x 3.15 in) |
| Weight | 1.5 kg (3.3 lb) |
| Power Source | Compressed air (pneumatic) |
| Main Functions | Drilling, reaming, countersinking |
| Maintenance | Regular lubrication, clean air inlet filter |
| Safety | Use eye protection, disconnect air supply before maintenance |
| Spare Parts & Repairability | Replaceable chuck, seals, and O-rings; service kit available |
| General Information | Industrial-grade pneumatic drill for precision work |
Frequently Asked Questions - DPDM-10-30-PA Festo
What is the maximum chuck capacity of the Festo DPDM-10-30-PA?
The chuck capacity is 10 mm (0.39 in).
What is the operating pressure for this drill?
It operates at a recommended pressure of 6 bar (87 psi).
How do I lubricate the drill?
Use a pneumatic tool oil and apply a few drops into the air inlet before each use, or use an inline lubricator.
What safety precautions should I take?
Always wear safety goggles, disconnect the air supply when changing accessories, and ensure the workpiece is secured.
Can I use this drill for high-speed applications?
The max speed is 2000 rpm, suitable for general drilling and reaming. For higher speeds, consider a dedicated high-speed tool.
How do I replace the chuck?
Unscrew the chuck retaining screw (left-hand thread), then remove the chuck. Install the new chuck and tighten the screw. Refer to the manual for details.
What does the model number DPDM-10-30-PA mean?
DPDM indicates the series (pneumatic drill), 10 is the chuck capacity in mm, 30 is the stroke in mm, and PA denotes a variant (e.g., parallel action).
Is the drill repairable?
Yes, spare parts such as chucks, seals, and O-rings are available. A service kit can be ordered from Festo.
What type of air compressor is required?
A compressor delivering at least 6 bar and 0.5 l/s air flow is sufficient. Ensure the air is clean and dry.
How do I clean the drill?
Wipe with a damp cloth; do not immerse. Clean the air inlet filter regularly to prevent clogging.
User questions about DPDM-10-30-PA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DPDM-10-30-PA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPDM-10-30-PA by Festo.
USER MANUAL DPDM-10-30-PA Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DPDM-10-30-PA
Category : Drill