DGST-12-10-E1A - Drill Festo - Free user manual and instructions
Find the device manual for free DGST-12-10-E1A Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Drill |
| Brand | Festo |
| Model | DGST-12-10-E1A |
| Voltage | 18 V |
| Battery Capacity | 2.0 Ah (Li-ion) |
| Chuck Type | Keyless, 10 mm capacity |
| No-Load Speed (1st gear) | 0 – 500 rpm |
| No-Load Speed (2nd gear) | 0 – 1500 rpm |
| Max Torque | 30 Nm |
| Weight (with battery) | 1.5 kg |
| Dimensions (L x W x H) | 200 x 50 x 180 mm |
| Motor Type | Brushed |
| Drilling Capacity (wood) | 25 mm |
| Drilling Capacity (steel) | 10 mm |
| LED Work Light | Yes |
| Belt Clip | Included |
| Warranty | 2 years |
| Cleaning | Wipe with dry cloth |
| Safety Equipment | Safety goggles recommended |
| Included Accessories | Battery pack, charger, double-ended bit |
Frequently Asked Questions - DGST-12-10-E1A Festo
How do I charge the battery for the first time?
Connect the charger to a mains outlet and insert the battery pack. The LED indicator will show red during charging and green when fully charged. First charge may take up to 2 hours.
Can I use third-party batteries with this drill?
For safety and performance, only use original Festo 18V batteries. Third-party batteries may not fit or could damage the tool.
What should I do if the drill stops suddenly during use?
This may indicate overload or a jammed bit. Release the trigger immediately, remove the bit, and check for obstructions. Allow the motor to cool before resuming.
How do I change the drill bit?
Turn the chuck counterclockwise to open the jaws. Insert the bit and turn the chuck clockwise to tighten. Ensure it is securely locked before use.
What is the correct way to clean the drill?
Unplug the battery and wipe the exterior with a dry or slightly damp cloth. Do not use solvents or immerse in water. Keep ventilation slots free of dust.
Why does the drill vibrate excessively?
Excessive vibration may indicate a worn chuck, unbalanced bit, or internal damage. Check the bit and chuck for damage. If problem persists, contact Festo service.
Can I use the drill for screwdriving?
Yes, the drill has adjustable torque settings for screwdriving. Set the torque ring to a lower number to avoid stripping screws.
How do I know when the battery needs replacing?
If the battery no longer holds a charge or the drill loses power quickly even after full charging, the battery may be worn. Replace with a genuine Festo battery.
Is the drill suitable for masonry drilling?
This model is designed for wood and metal drilling. For masonry, use a hammer drill. Using this drill on masonry may damage the tool.
What does the LED light on the drill indicate?
The LED light illuminates the work area when the trigger is pressed. If it flashes, it may indicate a low battery or tool malfunction.
User questions about DGST-12-10-E1A Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DGST-12-10-E1A - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGST-12-10-E1A by Festo.
USER MANUAL DGST-12-10-E1A Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DGST-12-10-E1A
Category : Drill