DGSL-6-30-PA - Drill Festo - Free user manual and instructions
Find the device manual for free DGSL-6-30-PA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Drill Unit |
| Model | DGSL-6-30-PA |
| Brand | Festo |
| Piston Diameter | 6 mm |
| Stroke Length | 30 mm |
| Operating Pressure | 6 bar (max 8 bar) |
| Max Speed | 6500 rpm (at 6 bar) |
| Air Inlet Thread | G1/8 |
| Sound Level | < 70 dB(A) |
| Temperature Range | -10 °C to +60 °C |
| Weight | 0.35 kg |
| Dimensions (LxWxH) | 120 mm x 30 mm x 30 mm |
| Housing Material | Aluminum alloy |
| Connection Type | Push-in fitting for 4 mm tube |
| Maintenance | Lubricate with Festo oil M1; check seals |
| Repairability | Seal kit available; disassembly with hex wrench |
| Safety | Use protective goggles; ensure pressure release before servicing |
Frequently Asked Questions - DGSL-6-30-PA Festo
What is the working pressure range for the DGSL-6-30-PA?
The recommended operating pressure is 6 bar, with a maximum of 8 bar. Exceeding 8 bar may damage the unit.
What type of lubrication is required?
Use Festo oil M1 or equivalent pneumatic tool oil. Apply a few drops to the air inlet before use if the compressed air system is not lubricated.
How can I clean the drill unit?
Wipe the exterior with a damp cloth. Do not use solvents. For internal cleaning, consult the service manual.
What is the maximum speed?
At 6 bar, the no-load speed is approximately 6500 rpm. Speed may vary slightly depending on load and air pressure.
Can I use this drill with a vacuum attachment?
No, this unit is designed for direct pneumatic operation only. A vacuum adapter is not supported.
How do I replace worn seals?
Disconnect air supply. Use a hex wrench to remove end caps. Replace seals with Festo seal kit for DGSL-6-30-PA. Reassemble and test.
What type of air filter should I use?
A 5 micron filter is recommended for best performance. Use a Festo MS series filter unit upstream of the drill.
Is it normal for the housing to get warm?
Slight warming is normal due to friction. If excessively hot, check lubrication and air pressure. Allow cooling if necessary.
Can the drill be mounted in any orientation?
Yes, the unit can be mounted in any orientation. Ensure proper support and that the air inlet is not obstructed.
What is the warranty period?
Festo offers a 2-year warranty from date of purchase against manufacturing defects. Contact Festo support for claims.
User questions about DGSL-6-30-PA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DGSL-6-30-PA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGSL-6-30-PA by Festo.
USER MANUAL DGSL-6-30-PA Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DGSL-6-30-PA
Category : Drill