DGST-10-30-PA - Drill Festo - Free user manual and instructions
Find the device manual for free DGST-10-30-PA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Drill |
| Model | DGST-10-30-PA |
| Brand | Festo |
| Chuck Size | 10 mm (3/8") |
| Max Drilling Capacity | 10 mm in steel |
| Free Speed | 2000 rpm |
| Air Inlet | 1/4" NPT |
| Operating Pressure | 6.2 bar (90 psi) |
| Air Consumption | 5 CFM |
| Weight | 1.2 kg (2.6 lbs) |
| Overall Length | 190 mm |
| Exhaust Type | Rear exhaust |
| Reversible | Yes |
| Vibration Level | < 2.5 m/s² |
| Sound Level | 82 dB(A) |
| Housing Material | Composite |
| Maintenance | Regular lubrication, clean air filters |
| Safety Precautions | Wear eye protection, disconnect air supply when not in use |
| Spare Parts Availability | Available from Festo |
| Warranty | 1 year |
| Included Accessories | Drill, chuck key, manual |
Frequently Asked Questions - DGST-10-30-PA Festo
How do I change the chuck on my Festo DGST-10-30-PA?
To change the chuck, first ensure the air supply is disconnected. Insert a hex key into the chuck and turn counterclockwise to loosen. Remove the old chuck and attach the new one by tightening clockwise. Use the chuck key to secure it.
What type of oil should I use for lubrication?
Use a lightweight pneumatic tool oil (ISO VG 10-15). Add 2-3 drops into the air inlet before each use. Over-oiling can attract debris.
Can I use this drill for wood and metal?
Yes, the Festo DGST-10-30-PA is suitable for drilling into wood, metal, and plastic. For metal, use a slower speed and apply cutting oil.
What is the recommended operating pressure?
The recommended operating pressure is 6.2 bar (90 psi). Do not exceed 8 bar as it may damage the tool and reduce safety.
How do I maintain the drill?
Regular maintenance includes lubricating daily, cleaning air filters, checking for air leaks, and inspecting the chuck for wear. Store in a dry place.
The drill is not working properly. What should I check?
First, ensure the air supply is connected and pressure is adequate. Check for blocked air filters or hoses. If the motor stalls, disassemble and clean the rotor assembly.
Can I reverse the direction of rotation?
Yes, the drill has a reversible switch. Locate the reversing lever near the trigger and slide it to change direction. Never switch while the tool is running.
What safety gear should I wear?
Always wear safety glasses to protect from flying debris. Use ear protection if operating for extended periods. Avoid loose clothing or jewelry that could get caught.
Where can I buy spare parts?
Spare parts are available from authorized Festo dealers or online through the official Festo website. Common parts include chucks, seals, and trigger assemblies.
How do I store the drill when not in use?
Disconnect the air hose, clean the drill with a damp cloth, and apply a light oil layer. Store in a clean, dry area away from extreme temperatures. Keep in a case if available.
User questions about DGST-10-30-PA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DGST-10-30-PA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGST-10-30-PA by Festo.
USER MANUAL DGST-10-30-PA Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DGST-10-30-PA
Category : Drill