BP-VG3090FE - Computer Cooling Component Bitspower - Free user manual and instructions
Find the device manual for free BP-VG3090FE Bitspower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | GPU Water Block |
| Brand | Bitspower |
| Model | BP-VG3090FE |
| Compatibility | NVIDIA GeForce RTX 3090 Founders Edition |
| Material (Base) | Nickel-plated Copper |
| Material (Top) | Acrylic |
| Cooling Type | Liquid Cooling (Water Block) |
| Dimensions (L x W x H) | Approx. 200 x 120 x 20 mm |
| Weight | Approx. 500 g |
| Port Threads | G1/4" |
| RGB Lighting | Addressable RGB (3-pin 5V) |
| Flow Direction | Reversible (Inlet/Outlet) |
| Included Accessories | Thermal pads, mounting screws, O-rings, installation guide |
| Maintenance | Flush with distilled water annually; clean with isopropyl alcohol |
| Safety | Ensure secure mounting; pressure test loop before power on |
| Spare Parts Availability | Thermal pads, screws, O-rings available from Bitspower |
| Repairability | User-serviceable O-rings and acrylic top |
| Warranty | 2 years (excluding improper installation) |
Frequently Asked Questions - BP-VG3090FE Bitspower
What is the Bitspower BP-VG3090FE compatible with?
This water block is specifically designed for the NVIDIA GeForce RTX 3090 Founders Edition graphics card. It may not fit other models without modifications.
What tools are needed for installation?
You will need a Phillips head screwdriver, thermal paste, and isopropyl alcohol for cleaning. The block comes with all necessary screws and thermal pads.
How do I connect the RGB lighting?
The water block uses a 3-pin 5V addressable RGB connector. Connect it to your motherboard's ARGB header or a compatible controller.
What coolant can I use?
Use distilled water with a biocide or a premixed coolant from reputable brands. Avoid using pure glycol or automotive antifreeze, as they may damage the acrylic.
How do I test for leaks?
Before powering on the system, perform a 24-hour pressure test with a leak tester or by running the pump with the PSU jumped. Check all fittings and O-rings for drips.
What is the recommended thermal pad thickness?
Bitspower includes pre-cut thermal pads of varying thickness (usually 1mm and 2mm) to cover VRAM, VRM, and other components. Follow the installation guide for exact placement.
Can I disassemble the water block for cleaning?
Yes, the top acrylic and base can be separated. Remove the screws carefully, replace O-rings if worn, and clean the channels with a soft brush and isopropyl alcohol.
Does the water block come with a backplate?
No, the BP-VG3090FE is the front water block only. A separate backplate (e.g., Bitspower BP-BS3090FEBK) may be required for full coverage.
How do I mount the water block correctly?
Remove the original cooler, apply thermal paste to the GPU die, place the block with pre-installed pads, and tighten the screws in a cross pattern to even pressure. Torque to manufacturer spec.
What if I lose a screw or O-ring?
Spare parts are available from Bitspower or authorized resellers. Contact support with your model number for exact replacements.
User questions about BP-VG3090FE Bitspower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Computer Cooling Component in PDF format for free! Find your manual BP-VG3090FE - Bitspower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BP-VG3090FE by Bitspower.
USER MANUAL BP-VG3090FE Bitspower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bitspower
Model : BP-VG3090FE
Category : Computer Cooling Component