Bitspower

BP-VG6900XTRD - Uncategorized Bitspower - Free user manual and instructions

Find the device manual for free BP-VG6900XTRD Bitspower in PDF.

📄 3 pages English EN Download 💬 AI Question
Notice Bitspower BP-VG6900XTRD - page 1
Pick your language and provide your email: we'll send you a specifically translated version.

User questions about BP-VG6900XTRD Bitspower

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual BP-VG6900XTRD - Bitspower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BP-VG6900XTRD by Bitspower.

USER MANUAL BP-VG6900XTRD Bitspower

请说明冷板拆下背板后再依照照明盘,把冷板,背板安装到照片上。
Please remove the back plate from the waterblock, and then according the
instalation guide to install the water block, back plate with your graphics card
请从冷头拆下背板后再按照说明书,把冷头,背版安装到插件上。

Design for AMD Radeon RX 6900 XT

配件

1組

Bilspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product.

natural_image Pure electrical circuit lines without any symbols

AMD Radeon RX 6900 XT

Bitspower BP-VG6900XTRD - AMD Radeon RX 6900 XT - 1

适量使用等热膏

Bitspower BP-VG6900XTRD - AMD Radeon RX 6900 XT - 2

1.0 mm導熱垫片

Bitspower BP-VG6900XTRD - AMD Radeon RX 6900 XT - 3

2.5 mm導熱墊片

Bitspower BP-VG6900XTRD - AMD Radeon RX 6900 XT - 4

Applying the thermal pad and thermal paste on correct positions.

Bitspower BP-VG6900XTRD - Applying the thermal pad and thermal paste on correct positions. - 1

Using appropriate amount of thermal paste.

Bitspower BP-VG6900XTRD - Applying the thermal pad and thermal paste on correct positions. - 2

1.0 mm Thermal pad

Bitspower BP-VG6900XTRD - Applying the thermal pad and thermal paste on correct positions. - 3

2.5 mm Thermal pad

Bitspower BP-VG6900XTRD - Applying the thermal pad and thermal paste on correct positions. - 4

Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply.

导热垫片和导热膏的正确应用位置導熱垫

Bitspower BP-VG6900XTRD - 导热垫片和导热膏的正确应用位置導熱垫 - 1

适量使用导热滴

Bitspower BP-VG6900XTRD - 导热垫片和导热膏的正确应用位置導熱垫 - 2

1.0毫米导热垫片

Bitspower BP-VG6900XTRD - 导热垫片和导热膏的正确应用位置導熱垫 - 3

2.5毫米导热垫片

Bitspower BP-VG6900XTRD - 导热垫片和导热膏的正确应用位置導熱垫 - 4

Notice:Bitspower recommends that consumers add the Bitspower dye to distilled water or purified water for their water-cooling liquid. If the

consumer chooses different water-cooling liquids, the resulting impurities may cause peeling of the coating on some of the hardware, water channels blockage by built-up residue, improper operation of the water pump, water tank tube breakage, and o-rings deformation leading to leakage. Any issues related to the use of inappropriate water-cooling liquid will be the responsibility of the consumer. Do not turn on the pump if the reservoir is empty.

Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. 本公司保留对产品的设计完成以及解答的权力,如有变动恕不另行通知,产品取色与配件以实能为准。

V2/第二版

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Bitspower

Model : BP-VG6900XTRD

Category : Uncategorized