Mojo Pro MJP3000.1 - Receiver Memphis Audio - Free user manual and instructions
Find the device manual for free Mojo Pro MJP3000.1 Memphis Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monoblock Subwoofer Amplifier |
| Amplifier Class | Class D |
| RMS Power (4 ohms) | 1500W |
| RMS Power (2 ohms) | 3000W |
| RMS Power (1 ohm) | 3000W |
| Frequency Response | 10Hz - 250Hz |
| Input Sensitivity | 200mV - 5V |
| Impedance Stability | 1 ohm stable |
| Dimensions (W x L x H) | 10.2 x 2.4 x 7.1 inches |
| Weight | 10.5 lbs |
| Power Supply Voltage | 12V DC battery |
| Fuse Rating | 300A (external) |
| Main Features | Low-pass filter, subsonic filter, bass boost, remote level control |
| Protection Circuits | Thermal, overcurrent, short circuit, DC offset |
| Installation | Professional installation recommended |
| Maintenance | Keep vents clean, avoid moisture |
| Safety Approvals | CE, RoHS compliant |
Frequently Asked Questions - Mojo Pro MJP3000.1 Memphis Audio
What is the recommended gauge for power and ground wires?
For a 3000W RMS amplifier, use 0 AWG power and ground wires, and ensure a proper fuse within 18 inches of the battery.
Can this amplifier run at 0.5 ohm?
No, the Mojo Pro MJP3000.1 is designed to be stable down to 1 ohm. Running lower impedances may cause damage.
What type of input connections does it have?
It features RCA inputs for line-level signal and speaker-level inputs for high-level connection.
How do I set the gain correctly?
Use a digital multimeter or oscilloscope to set the gain to match your head unit's output voltage, avoiding clipping.
Does it come with a remote bass knob?
Yes, a remote level control is included for adjusting bass from the driver's seat.
What is the subsonic filter for?
The subsonic filter (typically 10-50Hz) prevents ultra-low frequencies that can damage your subwoofer and waste power.
Can I bridge this amplifier?
No, this is a monoblock amplifier designed for a single subwoofer load. Bridging is not applicable.
What fuse size is required?
Use an external 300A fuse on the power wire, installed close to the battery.
Is the amplifier fully regulated?
No, it uses a unregulated power supply, so output voltage varies with battery voltage.
How to troubleshoot overheating?
Ensure adequate ventilation, lower the gain, check impedance load isn't below 1 ohm, and verify the thermal protection circuit is not triggering.
User questions about Mojo Pro MJP3000.1 Memphis Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Mojo Pro MJP3000.1 - Memphis Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mojo Pro MJP3000.1 by Memphis Audio.
USER MANUAL Mojo Pro MJP3000.1 Memphis Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Memphis Audio
Model : Mojo Pro MJP3000.1
Category : Receiver