Memphis Audio

MJP750.1 - Receiver Memphis Audio - Free user manual and instructions

Find the device manual for free MJP750.1 Memphis Audio in PDF.

📄 14 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Memphis Audio MJP750.1 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Monoblock Car Audio Amplifier
Model MJP750.1
Brand Memphis Audio
Amplifier Class Class D
RMS Power (4 ohms) 400W x 1
RMS Power (2 ohms) 600W x 1
RMS Power (1 ohm) 750W x 1
Frequency Response 20Hz - 250Hz
Low Pass Filter 40Hz - 250Hz, 12dB/octave
Subsonic Filter 15Hz - 40Hz, 12dB/octave
Bass Boost 0 - 12dB at 45Hz
Input Sensitivity 200mV - 8V
Dimensions 12.6 x 7.3 x 2.2 inches
Weight 4.5 lbs
Power Supply Voltage 10 - 16V DC
Recommended Fuse 80A (ANL type)
Speaker Impedance 1 - 8 ohms
Maintenance Keep ventilation clear; clean with dry cloth
Safety Protection against short circuit, thermal overload
Spare Parts Contact Memphis Audio authorized dealers

Frequently Asked Questions - MJP750.1 Memphis Audio

What is the RMS power rating of the MJP750.1 at 2 ohms?
The MJP750.1 delivers 600W RMS at 2 ohms.
Can this amplifier run at 1 ohm?
Yes, it is 1 ohm stable and produces 750W RMS at 1 ohm.
What gauge power wire should I use?
Use 4 AWG power and ground wires for optimal performance.
How do I set the gain correctly?
Set gain using a DMM (digital multimeter) to match the amplifier's output voltage to the speaker's RMS rating at the desired impedance.
What is the recommended fuse size?
An 80A ANL fuse is recommended for the power wire.
Does this amplifier have a subsonic filter?
Yes, it includes a subsonic filter (15-40Hz, 12dB/octave).
What is the frequency response range?
The frequency response is 20Hz to 250Hz, optimized for subwoofers.
Can I bridge two of these amplifiers?
No, this is a monoblock amplifier and cannot be bridged. Use a single amplifier per subwoofer configuration.
What are the dimensions of the MJP750.1?
It measures 12.6 x 7.3 x 2.2 inches.
How do I clean the amplifier?
Use a dry or slightly damp cloth to wipe the exterior. Avoid liquids entering vents.

User questions about MJP750.1 Memphis Audio

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Receiver in PDF format for free! Find your manual MJP750.1 - Memphis Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MJP750.1 by Memphis Audio.

USER MANUAL MJP750.1 Memphis Audio

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Memphis Audio

Model : MJP750.1

Category : Receiver