ADDAC813 - Uncategorized ADDAC System - Free user manual and instructions
Find the device manual for free ADDAC813 ADDAC System in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack synthesizer module |
| Brand | ADDAC System |
| Model | ADDAC813 |
| Module Width | 8 HP |
| Depth | 30 mm |
| Weight | 120 g |
| Power Supply | +12V / -12V (Eurorack) |
| Current Draw | +12V: 50 mA, -12V: 30 mA |
| Main Function | Voltage-controlled stereo panner |
| Input Impedance | 100 kΩ |
| Output Impedance | 100 Ω |
| Maximum Input Level | +20 dBu |
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB |
| Connectors | 3.5 mm jacks (mono) |
| Controls | Manual pan knob, CV attenuator |
| CV Input Range | 0–5 V or -5–+5 V (selectable) |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Use only with standard Eurorack power; reverse polarity protection |
| Repairability | Non-user-serviceable; contact ADDAC System for service |
Frequently Asked Questions - ADDAC813 ADDAC System
What is the ADDAC813?
The ADDAC813 is a voltage-controlled stereo panner module for Eurorack systems. It allows panning an audio signal between left and right outputs using a control voltage.
How do I power the ADDAC813?
Connect the included ribbon cable to your Eurorack case’s bus board, ensuring the red stripe aligns with the -12V rail. The module requires +12V (50 mA) and -12V (30 mA).
What are the input and output connections?
The module has one audio input (mono) and two audio outputs (Left and Right). It also has one CV input for pan control.
How do I calibrate the CV input?
The ADDAC813 features a trimmer on the rear to set the CV response range. By default, it accepts 0–5 V; you can change it to bipolar -5–+5 V by adjusting the trimmer.
Can I use the ADDAC813 with line-level signals?
Yes, the module accepts line-level signals up to +20 dBu. The input impedance is 100 kΩ, making it suitable for most audio sources.
What is the frequency response?
The frequency response is 20 Hz to 20 kHz with ±0.5 dB flatness, ensuring transparent audio performance.
Is the ADDAC813 reverse power protected?
Yes, it includes reverse polarity protection to prevent damage if the power ribbon is connected incorrectly.
Can I daisy-chain multiple modulation sources to the CV input?
While possible, it’s recommended to use a multiple module or a buffered mult to avoid loading the CV source.
How do I clean the module?
Disconnect power and wipe the front panel with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
What should I do if the module is not working?
First, check the power connection and ensure the red stripe aligns correctly. If the issue persists, contact ADDAC System support for assistance.
User questions about ADDAC813 ADDAC System
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ADDAC813 - ADDAC System and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADDAC813 by ADDAC System.
USER MANUAL ADDAC813 ADDAC System
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ADDAC System
Model : ADDAC813
Category : Uncategorized