ADDAC300 - Electronic module ADDAC System - Free user manual and instructions
Find the device manual for free ADDAC300 ADDAC System in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Eurorack Module |
| Brand | ADDAC System |
| Model | ADDAC300 |
| Category | Uncategorized |
| Dimensions (HP) | 8 HP |
| Height | 3U (128.5 mm) |
| Depth (Module) | About 25 mm (without power ribbon) |
| Weight | Approx. 100 g |
| Power Consumption | +12V: 50 mA, -12V: 30 mA |
| Power Connector | 10-pin ribbon cable (Doepfer standard) |
| Main Functions | CV processing, signal routing, mixing |
| Inputs | 4x CV inputs (0-10V), 2x audio inputs |
| Outputs | 2x CV outputs (0-10V), 2x audio outputs |
| Controls | 4x knobs, 1x button |
| LED Indicators | Power LED, activity LEDs on inputs |
| Construction | PCB with aluminum front panel |
| Maintenance and Cleaning | Clean with dry cloth; avoid liquids. No user-serviceable parts inside. |
| Safety | Use only with Eurorack power supplies. Disconnect power before module installation/removal. |
| Spare Parts and Repairability | Contact ADDAC System for spare parts. Module is not user-repairable. |
| General Information | Designed for use in standard Eurorack synthesizer cases. Compatible with Doepfer power supplies. |
Frequently Asked Questions - ADDAC300 ADDAC System
How do I power the ADDAC300 module?
Connect the included 10-pin ribbon cable to a standard Eurorack power supply with +12V and -12V rails. Ensure correct orientation (red stripe indicates -12V). Use a Doepfer-compatible bus board.
What are the input and output voltage ranges?
CV inputs and outputs are designed for 0 to +10V. Audio inputs and outputs expect typical Eurorack levels (10Vpp). Do not exceed +12V or -12V.
Can I use the ADDAC300 with other synthesizer formats?
The module is designed exclusively for Eurorack cases. It is not compatible with 5U or other formats without adapters.
Does the module come with a power cable?
Yes, a 10-pin to 16-pin ribbon cable is included for connection to standard Eurorack bus boards.
What is the warranty period?
ADDAC System offers a 1-year warranty from the date of purchase against manufacturing defects.
How do I clean the module?
Remove from case and gently wipe the front panel with a soft, dry cloth. Do not use cleaning agents or water. Ensure no liquid enters the module.
Is the module depth compatible with skiff cases?
Yes, the depth is approximately 25 mm (excluding power ribbon), making it suitable for most skiff cases.
What is the current draw?
+12V: 50 mA, -12V: 30 mA. Total 80 mA. Ensure your power supply can handle the additional load.
Can I chain multiple ADDAC300 modules?
Yes, you can use the outputs to feed inputs of other modules. No special chaining adapter is needed, but avoid exceeding voltage limits.
What if my module is not working?
First check power connections and orientation. Verify that the power supply is providing correct voltages. If issue persists, contact ADDAC System support.
User questions about ADDAC300 ADDAC System
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electronic module in PDF format for free! Find your manual ADDAC300 - ADDAC System and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADDAC300 by ADDAC System.
USER MANUAL ADDAC300 ADDAC System
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ADDAC System
Model : ADDAC300
Category : Electronic module