ADDAC102 - Uncategorized ADDAC System - Free user manual and instructions
Find the device manual for free ADDAC102 ADDAC System in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Synthesizer Module |
| Brand | ADDAC System |
| Model | ADDAC102 |
| Module Width | 8 HP (40.3 mm) |
| Module Height | 3U (128.5 mm) |
| Depth | 30 mm |
| Weight | 100 g |
| Power Consumption | +12V: 50 mA, -12V: 50 mA |
| Functions | Dual voltage-controlled mixer/attenuator with independent CV inputs, manual controls, and offset |
| Inputs | 2 audio/CV inputs, 2 CV inputs |
| Outputs | 2 mixed outputs, 1 inverted output |
| Controls | 4 knobs (level, CV attenuator, offset), 2 switches (polarity) |
| Indicators | None |
| Construction | PCB-mounted pots and jacks, aluminum front panel |
| Operating Temperature | 0°C to 50°C |
| Warranty | 2 years limited |
| Maintenance | Keep dry, clean with soft cloth, avoid solvents |
| Safety | Connect only to Eurorack case with proper power supply, reverse polarity protection |
| Repairability | Modular design, replaceable components |
Frequently Asked Questions - ADDAC102 ADDAC System
How do I install the ADDAC102 in my Eurorack case?
Connect the module to your Eurorack case using the included ribbon cable. Ensure the red stripe aligns with the -12V rail on both the module and the case's power bus. Secure using screws.
What power connector does the ADDAC102 use?
It uses a standard 10-pin Eurorack power connector (2x5) with +12V, -12V, and ground rails.
Can I use the ADDAC102 for both audio and CV signals?
Yes, the inputs are DC-coupled, so you can process both audio and control voltage signals.
What is the function of the offset knob?
The offset knob adds a DC offset to the output, useful for shifting CV signals or adjusting the bias of an audio signal.
How do I use the CV inputs?
Patch an external CV source (e.g., LFO, envelope) into the CV input to control the attenuation level of the corresponding channel. The CV attenuverter knob adjusts the depth and polarity.
What is the maximum input voltage?
The module accepts signals up to ±10V without damage; typical Eurorack levels are within this range.
How do I clean the ADDAC102?
Disconnect power before cleaning. Use a soft, dry cloth. Avoid liquids or solvents that could damage the front panel or PCB.
Is the ADDAC102 compatible with other Eurorack modules?
Yes, it is fully compatible with any Eurorack system that meets the Doepfer standard for power and signal levels.
What is the warranty period for the ADDAC102?
ADDAC System offers a 2-year limited warranty against manufacturing defects.
Where can I find the user manual?
The manual is available for free download on notice-facile.com or the ADDAC System official website in PDF format.
User questions about ADDAC102 ADDAC System
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ADDAC102 - ADDAC System and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADDAC102 by ADDAC System.
USER MANUAL ADDAC102 ADDAC System
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ADDAC System
Model : ADDAC102
Category : Uncategorized