ADDAC200RM - Uncategorized ADDAC System - Free user manual and instructions
Find the device manual for free ADDAC200RM ADDAC System in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Modular Synthesizer Module |
| Brand | ADDAC System |
| Model | ADDAC200RM |
| Width | 8 HP |
| Depth | 30 mm (approx.) |
| Weight | 100 g (approx.) |
| Power Supply | +12V / -12V via Eurorack bus board |
| Power Consumption | 50 mA (+12V) / 30 mA (-12V) |
| Main Functions | Voltage-controlled amplifier (VCA), envelope follower, or similar; refer to manual for exact features |
| Audio Inputs | 2 (6.35 mm TS jacks) |
| Audio Outputs | 2 (6.35 mm TS jacks) |
| Control Voltage Inputs | 2 (3.5 mm minijack) |
| Panel Material | Aluminum, black anodized |
| Mounting | Standard Eurorack rails with screws |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 0% to 80% (non-condensing) |
| Cleaning | Wipe with a dry, soft cloth; avoid solvents |
| Safety | Do not expose to water or excessive heat; disconnect power when removing module |
| Spare Parts | Contact ADDAC System or authorized dealers for replacement knobs, jacks, etc. |
| Repairability | Designed for module-level repair; consult manual for guidance |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - ADDAC200RM ADDAC System
What is the ADDAC200RM module used for?
The ADDAC200RM is a Eurorack module from ADDAC System. Its exact function varies by version; typically it serves as a voltage-controlled amplifier (VCA) or envelope follower. Refer to the user manual for specific functionality.
What power supply does the ADDAC200RM require?
It requires a standard Eurorack power supply with +12V and -12V rails. Power consumption is approximately 50 mA on +12V and 30 mA on -12V. Always ensure your case can provide sufficient current.
How many HP wide is the ADDAC200RM?
The module is 8 HP wide, making it suitable for most Eurorack cases. Check your available space before purchasing.
Can the ADDAC200RM be used with semi-modular synthesizers?
Yes, as long as the semi-modular synth has Eurorack-compatible patch points and power. Use 3.5 mm patch cables for CV and audio connections.
What are the input and output jacks on the ADDAC200RM?
The module features two audio inputs and two audio outputs via 6.35 mm TS jacks, plus two CV inputs via 3.5 mm minijacks. Exact labeling may vary.
How do I clean the ADDAC200RM panel?
Use a dry, soft cloth to gently wipe the panel. Avoid using water, alcohol, or abrasive cleaners, which could damage the finish.
Is the ADDAC200RM compatible with all Eurorack cases?
Yes, it uses standard Eurorack power headers (16-pin ribbon cable) and mounting holes. Ensure your case has enough depth (at least 30 mm) to accommodate the module.
What should I do if the module doesn't power on?
First, check the ribbon cable orientation: the red stripe should align with the -12V marking on both the module and bus board. Verify your case power supply is working and that the module is securely connected.
Can I replace knobs or jacks on the ADDAC200RM?
Yes, but use only original spare parts from ADDAC System or authorized dealers. Contact support for part numbers and installation tips.
Where can I find the user manual for the ADDAC200RM?
The manual is available for free download on notice-facile.com in PDF format. Provide your email for a translated version if needed.
User questions about ADDAC200RM ADDAC System
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ADDAC200RM - ADDAC System and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADDAC200RM by ADDAC System.