EFWH3000L - Water heater GORENJE - Free user manual and instructions
Find the device manual for free EFWH3000L GORENJE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Model | EFWH3000L |
| Brand | Gorenje |
| Capacity | 300 Liters |
| Power Supply | 240V / 60Hz |
| Heating Power | 4500 W |
| Maximum Temperature | 75°C |
| Energy Efficiency Class | C |
| Dimensions (HxWxD) | 1620 x 600 x 600 mm |
| Weight | 55 kg |
| Tank Material | Enameled Steel |
| Insulation Thickness | 50 mm |
| Standby Heat Loss | 1.2 kWh/24h |
| Pressure Rating | 8 bar |
| Safety Features | Thermostat, Pressure Relief Valve, Overheat Protection |
| Control Type | Mechanical Thermostat with Dial |
| Installation Type | Vertical Wall-Mounted |
| Connection Thread | G 1/2" Water Inlet/Outlet |
| Eco Mode | Yes (Economy Setting) |
| Anti-Legionella Function | Yes (Periodic Heating to 65°C) |
| Warranty | 2 Years (Tank: 5 Years) |
Frequently Asked Questions - EFWH3000L GORENJE
How do I set the temperature on my Gorenje EFWH3000L?
Turn the thermostat dial on the front panel. Recommended setting is 60°C for normal use. Turn clockwise to increase, counterclockwise to decrease.
What is the recommended maintenance for this water heater?
Annually, drain the tank to remove sediment. Check the pressure relief valve by lifting the lever briefly. Replace the magnesium anode rod every 2-3 years.
How can I reduce energy consumption?
Set the thermostat to 55-60°C, insulate hot water pipes, and use the Eco mode if available. Consider a timer to heat water only during off-peak hours.
What does the 'Error E1' code mean?
Error E1 typically indicates a sensor failure. Reset the heater by turning off power for 10 minutes. If it persists, contact a qualified technician.
Can I install the EFWH3000L myself?
Installation should be performed by a licensed plumber/electrician due to water and electrical connections. The heater must be mounted vertically on a wall capable of supporting its weight when full (approx. 355 kg).
What is the lifespan of this water heater?
With proper maintenance, the EFWH3000L can last 10-15 years. The tank has a 5-year warranty against leakage under normal use.
How long does it take to heat up?
For a full 300L tank, heating from 20°C to 60°C takes approximately 4-5 hours with a 4500W element. Partial draws heat faster.
Why is my water not getting hot enough?
Possible causes: thermostat set too low, faulty heating element, or sediment buildup. Check the thermostat setting first, then inspect the element for continuity.
Is the EFWH3000L suitable for solar pre-heating?
Yes, it can be used with solar systems. Connect the solar collector to the lower inlet; the heater will act as a backup. Ensure proper mixing valves for safety.
Where is the reset button located?
The reset button is behind the lower access panel. It resets the high-limit thermostat. Press it if the heater stops heating unexpectedly.
User questions about EFWH3000L GORENJE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual EFWH3000L - GORENJE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EFWH3000L by GORENJE.
USER MANUAL EFWH3000L GORENJE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GORENJE
Model : EFWH3000L
Category : Water heater