PLCMDVR45 - Camcorder Pyle - Free user manual and instructions
Find the device manual for free PLCMDVR45 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Camcorder |
| Brand | Pyle |
| Model | PLCMDVR45 |
| Video Resolution | 1080p Full HD (1920x1080) |
| Image Sensor | 16 Megapixel CMOS |
| Optical Zoom | 3x Digital Zoom |
| Display | 2.7-inch TFT LCD |
| Storage | SD/SDHC card up to 32GB (not included) |
| Video Format | MOV/H.264 |
| Photo Mode | 16MP still image capture |
| Connectivity | USB 2.0, AV out, HDMI out |
| Power | Rechargeable Li-ion battery (3.7V, 1050mAh) |
| Charging | USB charging via AC adapter or computer |
| Dimensions | 4.6 x 2.5 x 1.6 inches |
| Weight | 0.35 lbs (with battery) |
| Night Vision | Built-in IR LEDs |
| Microphone | Built-in stereo microphone |
| Speaker | Built-in speaker for playback |
| Battery Life | Approximately 60-90 minutes continuous recording |
| Remote Control | IR remote included |
| Accessories | AC adapter, USB cable, AV cable, remote control, carrying case |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - PLCMDVR45 Pyle
How do I charge the camcorder?
Connect the USB cable to the camcorder and a USB power adapter (5V/1A) or to a computer's USB port. Charging is indicated by a red LED. When fully charged, the LED turns off. Charging time is about 2-3 hours.
What type of memory card does the PLCMDVR45 support?
The camcorder supports SD and SDHC memory cards up to 32GB. It is recommended to use a Class 6 or higher card for smooth video recording. Insert the card with the label facing the front of the camcorder.
How do I transfer videos to my computer?
Use the USB cable to connect the camcorder to your computer. The camcorder will appear as a removable drive. Copy the MOV files from the DCIM folder to your computer. Alternatively, remove the SD card and use a card reader.
Can I use this camcorder as a webcam?
No, the PLCMDVR45 does not support webcam mode. It is designed for standalone recording only. To use it for streaming, you would need a separate capture device.
How do I reset the camcorder to factory settings?
Go to the Settings menu and select 'Reset All' or 'Factory Default'. If the unit freezes, remove the battery and SD card, wait 30 seconds, then reinsert and power on. You can also use a pin to press the reset button located inside the battery compartment.
The camcorder stops recording after a few minutes. What's wrong?
This is likely due to file size limitations (4GB for FAT32) or a slow memory card. Use a high-speed SD card (Class 10) and format it in the camcorder. Also, ensure the battery is sufficiently charged.
How do I set the date and time?
Press the MENU button, navigate to 'Date/Time' using the directional buttons, set the values with the up/down buttons, and press OK to confirm. The time stamp will be embedded in the video file.
What is the maximum recording time?
With a 32GB card and full battery, you can record approximately 4 hours of 1080p video. However, single file length is limited to 29 minutes (due to FAT32 file size limit). The camcorder will create new files automatically.
Can I charge the battery while recording?
No, charging and recording simultaneously is not supported. The camcorder must be turned off to charge. For extended recording, use an external power bank via USB while not charging the internal battery.
How do I clean the lens?
Use a microfiber cloth designed for lenses. Gently wipe the lens in a circular motion. Avoid using alcohol or abrasive cleaners. Keep the lens cap on when not in use to protect from dust.
User questions about PLCMDVR45 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camcorder in PDF format for free! Find your manual PLCMDVR45 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLCMDVR45 by Pyle.