DS-3T0306P - Network switch Hikvision - Free user manual and instructions
Find the device manual for free DS-3T0306P Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Model | DS-3T0306P |
| Brand | Hikvision |
| Ports | 6 x 10/100 Mbps (4 PoE + 2 uplink) |
| PoE Support | Yes, IEEE 802.3af/at, up to 30W per port |
| Switching Capacity | 1.2 Gbps |
| MAC Address Table | 1K entries |
| Dimensions (W x D x H) | 150 x 100 x 30 mm |
| Weight | 0.5 kg |
| Power Supply | DC 48V, 1A (included) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, Link/Act, PoE |
| Installation | Desktop or wall-mountable |
| Cleaning Instructions | Use dry cloth; avoid liquids and solvents |
| Safety Precautions | Use only provided power adapter; avoid overloading |
| Spare Parts & Repairability | No user-serviceable parts; contact Hikvision support for repairs |
Frequently Asked Questions - DS-3T0306P Hikvision
How to reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the LEDs flash. Release to restore defaults.
What is the default IP address of the switch?
This is an unmanaged switch; it has no IP address and works plug-and-play.
How do I enable PoE on a specific port?
PoE is enabled by default on all PoE ports. No configuration needed. If PoE stops, check the powered device's compatibility.
Can the switch be mounted on a wall?
Yes, it supports wall-mounting using the provided brackets and screws. Ensure proper ventilation.
What is the power consumption of the switch?
The switch consumes up to 48W (with PoE output of 30W). Actual consumption depends on connected devices.
Does the switch support VLAN?
No, this is an unmanaged switch and does not support VLAN configuration.
What should I do if the link LED is not lit?
Check the Ethernet cable connection, try a different cable, and ensure the connected device is powered on. If issue persists, test the port with another device.
Is the switch plug-and-play?
Yes, simply connect power and Ethernet cables. The switch auto-negotiates speed and duplex, and PoE powers compatible devices automatically.
What type of Ethernet cable is recommended?
Use Cat5e or higher for 10/100 Mbps speeds. For PoE, ensure the cable meets IEEE standards to avoid power loss.
How do I update the firmware?
Since this is an unmanaged switch, firmware updates are not applicable. No user intervention needed.
User questions about DS-3T0306P Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual DS-3T0306P - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-3T0306P by Hikvision.
USER MANUAL DS-3T0306P Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-3T0306P
Category : Network switch