DS-PDC10DM-EG2-WB - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PDC10DM-EG2-WB Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector (Wireless) |
| Brand | Hikvision |
| Model | DS-PDC10DM-EG2-WB |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | 12 meters (39 ft) at 25°C |
| Detection Angle | 90 degrees |
| Wireless Protocol | Hikvision proprietary (e.g., 868 MHz) |
| Power Supply | 3V CR123A Lithium Battery (x1) |
| Battery Life | Up to 3 years (typical use) |
| Dimensions (H x W x D) | 108 x 60 x 48 mm (4.25 x 2.36 x 1.89 in) |
| Weight | 90 g (3.17 oz) without battery |
| Operating Temperature | -10°C to +50°C (14°F to 122°F) |
| Ingress Protection | IP20 (indoor use only) |
| Alarm Output | Wireless signal to control panel |
| Tamper Protection | Anti-tamper switch (cover and wall) |
| LED Indicator | Red/Green for status (alarm, low battery, etc.) |
| Mounting | Wall or corner bracket (screws provided) |
| Certifications | CE, FCC |
| Compatibility | Hikvision alarm control panels (e.g., AX PRO series) |
| Maintenance | Clean lens with soft dry cloth; replace battery when low |
| Repairability | Battery replaceable; no user-serviceable parts inside |
Frequently Asked Questions - DS-PDC10DM-EG2-WB Hikvision
How do I install the DS-PDC10DM-EG2-WB?
Mount the detector at a height of 2-2.5 meters. Use the provided bracket and screws. Ensure the field of view is unobstructed. Insert the CR123A battery and pair with your control panel following the panel's instructions.
How to pair the detector with my Hikvision alarm panel?
Put the panel into pairing mode. Press the tamper switch or use the included pairing button (refer to the panel manual). The LED will blink to confirm pairing.
What is the detection range of this detector?
The detection range is up to 12 meters (39 feet) at 25°C. Coverage angle is 90 degrees. Performance may vary with temperature and mounting location.
How do I replace the battery?
Remove the detector from its mount. Open the battery compartment. Replace the CR123A battery with a new one. Reattach the detector. The LED may indicate low battery in advance.
What should I do if I get frequent false alarms?
Ensure the detector is not facing a heat source, window, or direct sunlight. Check for pets if allowed; adjust sensitivity via the panel if supported. Clean the lens. Relocate if necessary.
Can I use this detector outdoors?
No, the DS-PDC10DM-EG2-WB has an IP20 rating and is designed for indoor use only. It should not be exposed to rain or humidity.
How long does the battery last?
Battery life is typically up to 3 years under normal use. It depends on the number of alarm events and transmissions. The detector will send a low battery signal to the panel when needed.
What does the LED indicator mean?
Red flash = alarm event. Green flash = normal/status. Slow green = low battery. Off = sleep mode or no power. Refer to the manual for detailed patterns.
Is the detector compatible with older Hikvision panels?
It is designed to work with the AX PRO series and newer hybrid panels. Check the compatibility list or consult Hikvision support for older models.
How do I clean and maintain the detector?
Use a soft, dry cloth to clean the lens and housing. Do not use solvents. Avoid touching the lens. Regularly test the detector via your panel.
User questions about DS-PDC10DM-EG2-WB Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PDC10DM-EG2-WB - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PDC10DM-EG2-WB by Hikvision.