DS-PDTPH-E-WB - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PDTPH-E-WB Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hikvision |
| Model | DS-PDTPH-E-WB |
| Product Type | Wireless Alarm System Peripheral |
| Power Supply | Battery (CR123A, 3V) |
| Battery Life | Up to 3 years (typical usage) |
| Wireless Protocol | Hikvision proprietary RF (868 MHz) |
| Detection Method | Passive Infrared (PIR) |
| Detection Range | 12 meters (110°) |
| Tamper Protection | Yes, front cover and wall |
| LED Indicator | Red/Green for alarm and status |
| Operating Temperature | -10°C to 55°C |
| Operating Humidity | 0% – 95% (non-condensing) |
| Dimensions | 110 × 60 × 50 mm |
| Weight | 150 g (without battery) |
| Certifications | CE, FCC, RoHS |
| Compatibility | Hikvision Alarm Series (e.g., DS-PWA series) |
| Installation | Wall-mounted with included bracket |
| Maintenance | Periodic battery check and lens cleaning |
| Spare Parts | Battery (CR123A) and mounting kit |
| Repairability | Replace battery; dispose of unit if faulty |
Frequently Asked Questions - DS-PDTPH-E-WB Hikvision
How do I pair the DS-PDTPH-E-WB with my alarm panel?
Insert the battery, then press the tamper switch three times within 3 seconds. The LED will flash. On your panel, enter pairing mode and the device will be detected.
What type of battery does it use?
It uses a CR123A lithium battery (3V). Replace only with the same type.
How long does the battery last?
Battery life is up to 3 years under typical usage conditions, depending on environment and event frequency.
What is the detection range of the sensor?
The PIR sensor has a detection range of 12 meters with a 110° field of view.
How do I reset the device to factory defaults?
Remove the battery, wait 10 seconds, reinsert battery and press and hold the tamper switch for 5 seconds until the LED flashes rapidly.
Can I use this outdoors?
No, this device is designed for indoor use only. Do not expose to rain or direct sunlight.
What does the LED indicator mean?
Solid red: alarm triggered; flashing red: low battery; flashing green: heartbeat signal; off: normal standby.
How do I mount the sensor?
Use the included bracket and screws. Mount at a height of 2.2 meters, angled downward for optimal detection.
Is the device tamper-proof?
Yes, it has a tamper switch that triggers an alarm if the cover is opened or the device is removed from the wall.
What should I do if the sensor triggers false alarms?
Check for heat sources (radiators, direct sunlight) or moving objects (pets). Adjust the sensitivity via the panel settings or reposition the sensor.
User questions about DS-PDTPH-E-WB Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PDTPH-E-WB - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PDTPH-E-WB by Hikvision.
USER MANUAL DS-PDTPH-E-WB Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PDTPH-E-WB
Category : Alarm system