DS-PWA32-HR(868MHz) - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PWA32-HR(868MHz) Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless PIR Motion Detector |
| Model | DS-PWA32-HR (868MHz) |
| Brand | Hikvision |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters (110° wide) |
| Wireless Frequency | 868 MHz |
| Wireless Range | Up to 200 meters in open field |
| Power Supply | 3V CR123A Lithium battery |
| Battery Life | Up to 3 years (normal use) |
| Dimensions (W x H x D) | 60 x 105 x 45 mm |
| Weight | 120 g (including battery) |
| Operating Temperature | -10°C to +55°C |
| Humidity | Up to 95% non-condensing |
| Pet Immunity | Up to 25 kg (dogs/cats) |
| Alarm Output | Wireless signal to control panel |
| Supervision Interval | 15 minutes (adjustable) |
| Tamper Protection | Anti-tamper switch (cover & base) |
| Installation | Wall or corner mount (recommended height 2.1m) |
| Compatibility | Hikvision AX PRO series control panels |
| Maintenance | Clean lens with soft dry cloth; replace battery when low |
| Certifications | CE, FCC, EN 50131 Grade 2 |
Frequently Asked Questions - DS-PWA32-HR(868MHz) Hikvision
How do I pair the DS-PWA32-HR with my control panel?
Insert the battery, then press the tamper switch three times within 5 seconds. The LED will blink rapidly indicating pairing mode. On the control panel, go to device addition and scan for the detector. Refer to the panel's manual for exact steps.
What type of battery does it use and how long does it last?
It uses a 3V CR123A lithium battery. Under normal usage (10 alarms per day), the battery lasts up to 3 years. A low battery signal will be sent to the control panel.
Can it be used outdoors?
The DS-PWA32-HR is designed for indoor use only. It is not weatherproof. Operating temperature range is -10°C to +55°C, but it should be installed in a dry location.
How do I avoid false alarms from pets?
The detector has pet immunity up to 25 kg. Install the detector at the recommended height of 2.1 meters and avoid aiming it at stairs or areas where pets may climb. The digital filtering reduces false triggers from animals.
What is the maximum detection range?
The PIR sensor can detect movement up to 12 meters away with a 110° wide angle. The range can be affected by temperature and obstacles.
How often should I clean the detector?
Clean the lens every 6 months with a soft, dry cloth. Avoid using water or cleaning solvents. Also check for cobwebs or dust around the sensor.
Does it have tamper protection?
Yes, the detector has an anti-tamper switch that triggers an alarm if the cover is opened or the device is removed from its mounting base.
Can I adjust the sensitivity?
The sensitivity is not user-adjustable on the detector itself, but some control panels allow adjusting alarm thresholds via the app or keypad. Check your panel's settings.
What is the wireless range?
The 868 MHz wireless signal can reach up to 200 meters in open air. Walls and metal objects will reduce the range. Ensure the control panel is within range.
How do I replace the battery?
Remove the detector from its bracket, open the cover, remove the old CR123A battery, and insert a new one with correct polarity. Reattach the cover and mount. The detector will automatically reconnect.
User questions about DS-PWA32-HR(868MHz) Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PWA32-HR(868MHz) - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PWA32-HR(868MHz) by Hikvision.