DS-PDD12P-EG2-WB - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PDD12P-EG2-WB Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hikvision |
| Model | DS-PDD12P-EG2-WB |
| Type | Wireless PIR Motion Detector |
| Category | Alarm System |
| Dimensions (H x W x D) | 110 x 60 x 50 mm |
| Weight | 100 g |
| Power Supply | 2 x CR123A 3V Lithium Batteries |
| Battery Life | Up to 3 years (typical usage) |
| Detection Range | 12 meters |
| Detection Angle | 90° |
| Wireless Protocol | Hikvision Proprietary (Zigbee-like) |
| Frequency | 868 MHz (EU) / 915 MHz (US) |
| Pet Immunity | Up to 25 kg (55 lbs) |
| Tamper Protection | Yes (front and back) |
| Low Battery Indication | Yes |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Installation | Wall mount (bracket included) |
| LED Indicator | Red/Green for alarm and status |
| Compatibility | Hikvision alarm panels (e.g., DS-PWx series) |
| Maintenance | Clean lens with soft dry cloth |
| Safety Certifications | CE, FCC, RoHS |
| Spare Parts | Batteries (user-replaceable) |
| Repairability | Not user-serviceable; contact Hikvision support |
Frequently Asked Questions - DS-PDD12P-EG2-WB Hikvision
How do I pair the DS-PDD12P-EG2-WB with my Hikvision alarm panel?
Press and hold the tamper button for 3 seconds until the LED flashes. Then put your panel into pairing mode (refer to panel manual). The detector will automatically connect. Confirm via panel.Note: Ensure the detector is within 30m of the panel.
What batteries does it use and how long do they last?
It uses two CR123A 3V lithium batteries. Battery life is approximately 3 years under normal usage. Low battery is indicated by a slow LED flash.
What is the detection range and angle?
The detection range is up to 12 meters (40 feet) and the detection angle is 90 degrees. It is suitable for indoor use.
Is the detector pet immune?
Yes, it offers pet immunity up to 25 kg (55 lbs). Ensure you mount it at the recommended height (2.1 m) to avoid false alarms from small pets.
How do I replace the batteries?
Remove the detector from its bracket by sliding it upwards. Open the battery compartment at the back. Replace with two new CR123A batteries, observing polarity. Reattach the detector.
What does the tamper protection do?
The tamper switch triggers an alarm if the detector is forcibly removed from its bracket or if the cover is opened. This prevents unauthorized disabling.
Can I use this detector outdoors?
No, it is designed for indoor use only. Exposure to rain or extreme temperatures may damage it.
How does the LED indicator behave?
Normal: off. Alarm: red flash for 2 seconds. Tamper: slow red flash. Low battery: slow red flash every 30 seconds. Pairing: fast green flash.
What should I do if the detector does not respond?
First, check the batteries and replace if needed. Ensure it is within range of the panel. Try re-pairing by pressing the tamper button. If still not working, reset by removing batteries for 10 seconds and try pairing again.
How do I clean and maintain the detector?
Wipe the lens and casing with a soft, dry cloth. Do not use solvents or water. Replace batteries once a year or when low battery is indicated. Avoid obstructing the detection area.
User questions about DS-PDD12P-EG2-WB Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PDD12P-EG2-WB - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PDD12P-EG2-WB by Hikvision.
USER MANUAL DS-PDD12P-EG2-WB Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PDD12P-EG2-WB
Category : Alarm system