BTG393IS - Tumble dryer BEKO - Free user manual and instructions
Find the device manual for free BTG393IS BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Tumble dryer |
| Brand | Beko |
| Model | BTG393IS |
| Capacity (kg) | 8 kg |
| Energy Class | A++ |
| Annual Energy Consumption (kWh) | 235 kWh |
| Drying Type | Condenser |
| Dimensions (H x W x D cm) | 85 x 60 x 58 |
| Weight (kg) | 35 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption (W) | 2200 W |
| Noise Level (dB) | 65 dB |
| Number of Programs | 15 |
| Key Functions | Sensor Drying, Anti-Crease, Delayed Start, Quick Dry |
| Lint Filter | Yes, clean after each cycle |
| Condenser Cleaning | Every 30 cycles or as needed |
| Water Tank (for condensation) | Yes, empty after each cycle |
| Child Lock | Yes |
| Overheating Protection | Yes |
| Spare Parts Availability | Yes, through authorized service centers |
| Warranty | 2 years (standard) |
Frequently Asked Questions - BTG393IS BEKO
How do I clean the lint filter on my Beko BTG393IS?
Open the door, pull the lint filter out from the door frame, remove the lint by hand or with a vacuum cleaner, rinse under running water if necessary, dry thoroughly, and reinstall. Clean after every drying cycle for optimal performance.
What should I do if the dryer doesn't start?
Check that the door is fully closed, the power cord is plugged in, the circuit breaker is on, and the 'Start/Pause' button is pressed. Also ensure the water tank is not full and the selected program is valid.
Can I dry all types of fabrics in this dryer?
No. Check the care labels on garments. Delicate fabrics, wool, silk, and items with foam padding may be labeled 'Do not tumble dry'. Use appropriate programs for cottons, synthetics, or mixed loads.
How often should I clean the condenser?
Clean the condenser every 30 drying cycles or at least once a month. Remove it according to the manual, rinse with water, remove any lint, and replace. This prevents reduced drying performance.
What does the 'Anti-Crease' function do?
After the drying cycle ends, the drum rotates periodically without heat for up to 2 hours to prevent wrinkles. You can activate it via the program selection. Ideal if you cannot unload immediately.
Why is my dryer taking longer than usual to dry?
Possible causes: clogged lint filter or condenser, full water tank, overloaded drum, low ambient temperature, or incorrect program selection. Clean filters and check loading.
How do I activate the Child Lock?
Press and hold the 'Child Lock' button (or a combination of buttons, typically Start+Pause for 3 seconds) until the indicator lights up. To deactivate, repeat the same process.
What is the maximum load capacity for different fabrics?
For cotton: 8 kg full load. For synthetics: 4 kg. For delicate fabrics: 2 kg. Overloading reduces drying efficiency and may cause damage.
Can I use fabric softener sheets in this dryer?
Yes, but use them sparingly. Place a dryer sheet on top of the load before starting. Overuse may leave residue on the lint filter and reduce airflow.
How do I drain the water tank if it's not connected to a hose?
The water tank is located at the bottom right. Pull it out, open the cap, and pour the collected water into a sink. Replace and close securely. For continuous drainage, attach a hose to the tank's outlet.
User questions about BTG393IS BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual BTG393IS - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BTG393IS by BEKO.
USER MANUAL BTG393IS BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : BTG393IS
Category : Tumble dryer