B3T67249WBPB - Tumble dryer BEKO - Free user manual and instructions
Find the device manual for free B3T67249WBPB BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Tumble Dryer |
| Brand | Beko |
| Model | B3T67249WBPB |
| Capacity | 7 kg |
| Dimensions (H x W x D) | 84.5 x 60 x 60 cm |
| Weight | 42 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2800 W |
| Energy Class | A++ |
| Noise Level | 65 dB(A) |
| Drying Programs | Cotton, Synthetics, Delicates, Wool, Mix, Sport, Jeans, Shirts |
| Special Functions | Anti-Crease, Sensor Drying, Delay Timer, Quick Dry |
| Filter Type | Lint Filter (Clean after each cycle) |
| Condenser Cleaning | Front access condenser unit, clean every 3 months |
| Safety Features | Child Lock, Overheat Protection, Door Lock |
| Spare Parts Availability | Filters, belts, heating elements available online |
| Repairability Index | 8.4/10 (France standard) |
| Warranty | 2 years (standard) |
Frequently Asked Questions - B3T67249WBPB BEKO
How do I clean the lint filter on my Beko B3T67249WBPB dryer?
Open the door and pull out the lint filter located at the bottom of the drum opening. Remove lint by hand or with a soft brush. Rinse under running water if needed, then dry thoroughly before reinserting.
Why is my dryer not drying clothes properly?
Possible causes: clogged lint filter, full condenser unit, overloaded drum, or incorrect program selected. Clean the filter, check the condenser, and reduce load size. Also ensure the room temperature is not too high.
How often should I clean the condenser on my Beko dryer?
Clean the condenser unit every 3 months or when the 'Clean Condenser' indicator lights up. Access the condenser from the front panel, rinse with water, and let it dry before reinstalling.
Can I install the B3T67249WBPB dryer in a cupboard?
Yes, provided there is adequate ventilation. The dryer requires at least 10 cm clearance on sides and back for airflow. Do not block the ventilation grilles.
What does the 'Anti-Crease' function do?
The Anti-Crease function periodically rotates the drum without heat after the cycle ends, preventing clothes from settling and reducing wrinkles if you cannot remove them immediately.
How do I reset the child lock feature?
Press and hold the 'Child Lock' button for 3 seconds until the lock icon disappears. Refer to the manual for exact button location, as it may vary by model.
What is the maximum load weight for cotton programs?
The maximum load is 7 kg for cotton and 3.5 kg for synthetics or delicates. Overloading can cause poor drying and damage the machine.
Where can I find spare parts for this dryer?
Spare parts are available through Beko authorized service centers or online retailers. Commonly replaced parts are filters, belts, and heating elements. Check the model number before ordering.
The dryer stops mid-cycle; what should I do?
Check if the water tank is full (for condenser models) or if the lint filter is blocked. Also verify that the door is fully closed. If the problem persists, consult the manual or contact support.
How do I drain the water tank manually?
Pull out the water tank from the bottom front of the dryer. Empty the water into a sink. Reinsert the tank firmly until it clicks. The tank must be emptied after each use.
User questions about B3T67249WBPB BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual B3T67249WBPB - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B3T67249WBPB by BEKO.