BEKO

B5T68239WSPB - Tumble dryer BEKO - Free user manual and instructions

Find the device manual for free B5T68239WSPB BEKO in PDF.

📄 68 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice BEKO B5T68239WSPB - page 38
View the manual : English EN Polski PL
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeTumble Dryer
BrandBeko
ModelB5T68239WSPB
Capacity8 kg
Energy Efficiency ClassA++
Drying SystemHeat Pump Condenser
Height850 mm
Width595 mm
Depth600 mm
Weight45 kg
Power Supply230 V, 50 Hz
Noise Level65 dB
Delay StartUp to 24 hours
Anti-Crease FunctionYes
Sensor DryingYes
Filter IndicatorYes
Water Tank Full IndicatorYes
Child LockYes
Overheating ProtectionYes
Spare Parts AvailabilityYes (common)
Condenser Self-CleaningNo

Frequently Asked Questions - B5T68239WSPB BEKO

How do I clean the lint filter?
Open the door, pull out the lint filter located in the door opening, and remove the lint by hand or with a soft brush. Rinse under running water if necessary, then dry and reinsert.
Why is my dryer not starting?
Check that the door is fully closed, the power cord is plugged in, and the program is selected. Also ensure the water tank is not full and the filter is clean.
How often should I empty the water tank?
Empty the water tank after every drying cycle, or when the 'Water Tank Full' indicator lights up. Failure to do so may cause the dryer to stop.
Can I dry all fabrics in this dryer?
Most fabrics can be dried, but always check the care label. Avoid drying items with foam rubber, wool (if not labeled), or silk. Use the appropriate program.
What does the 'Anti-Crease' function do?
After drying, the drum rotates periodically for up to 2 hours to prevent wrinkles. You can remove clothes at any time during this phase.
How do I clean the condenser?
Locate the condenser unit (usually behind a flap at the bottom front). Remove it, rinse with water, and brush off any lint. Dry thoroughly before reinserting.
My clothes are still wet after a cycle. What's wrong?
Check if the lint filter or condenser is blocked, the load is too large, or the selected program is not suitable. Ensure the room temperature is not too low.
How do I use the delay start feature?
Press the 'Delay Start' button repeatedly to set the desired delay (e.g., 3, 6, 9 hours). The program will start after the set time. Close the door and press Start.
Is it normal for the dryer to make noise?
Some noise is normal, such as the hum of the motor and the tumbling of clothes. Unusual noises like rattling or grinding may indicate a loose item or a problem with the drum bearings.
How do I enable the child lock?
Press and hold the 'Child Lock' button (usually marked with a padlock icon) for 3 seconds. A symbol will appear on the display. Repeat to disable.

User questions about B5T68239WSPB BEKO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Tumble dryer in PDF format for free! Find your manual B5T68239WSPB - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B5T68239WSPB by BEKO.

USER MANUAL B5T68239WSPB BEKO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BEKO

Model : B5T68239WSPB

Category : Tumble dryer